Recent content by Truck#3

  1. Truck#3

    damn is my truck going to blow up?(video inside)

    Yeah it sounds exactly like a valve not sealing the valve guides wear out. I wouldent be surprised if its leaving a valve stamp on the piston.
  2. Truck#3

    Trying to remove fan

    Mine was a pain I ended up taking the water pump. Off with orthe fan attached
  3. Truck#3

    Fuel tank valve o-rings

    They put ethonal in diesel?
  4. Truck#3

    Do you guys think my truck can pull a backhoe?

    All you need is a john Deere key they are all the same.
  5. Truck#3

    running without a cdr or rdt? will it hurt anything?

    I've done it before with just taking the oil fill cap off to let the gas out when I took it for a test drive. I would not recommend it because I made a mess of my engine bay.
  6. Truck#3

    can soot hurt my aluminum wheel???

    I towed my camper once 700 miles and the whole thing was covered in soot and oil. It was a pain to get off
  7. Truck#3

    my own custom exhaust...

    thats fine i ran mine like that a while. you will cover the bottom with soot though
  8. Truck#3

    Sea Foam

    I would not recommend running straight seafoam since it has no lubricating properties its prolly better the mix it in them fuel tank. ive done it in the fuel filter once and put half atf in there. it cleans everything out good my truck ran way smoother
  9. Truck#3

    One piece fuel filter for 7.3?

    for the water in fuel light
  10. Truck#3

    Shift Knob Came Right Off In My Hand!

    I just used silicone I can get it off if I try real hard
  11. Truck#3

    revs on cold start

    this just started happining recently when i start my truck in the morning it will rev up and down up to 1500 rpm whats causing this? my neighbor is running out and giving me bad looks too.
  12. Truck#3

    Hard starts, smoke, a little help please

    does the starter seem to spin it fast enough? check battery terminals for corrosion and clean them
  13. Truck#3

    water/**** injection wiring

    this is what I got its pretty cheap and accurate http://cgi.ebay.com/ebaymotors/DIGITAL-EGT-THERMOMETER-PYROMETER-W-PROBE-NPT_W0QQcmdZViewItemQQ_trksidZp4634Q2ec0Q2em14Q2el1262QQhashZitem2ea71d3807QQitemZ200372205575QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
  14. Truck#3

    Return Line Kit

    I got mine from oregon diesel. its a great kit comes with everthing even copper washers for the injectors. i had no problesms
Top