Recent content by giezy

  1. giezy

    Block cement to strengthen bottom end?

    Just planning this out before spending money never thought of the oil cooler though. I did this to a 454 race motor and worked fine. Not looking to build crazy hp just a tq mother for some fun dd to toot around in like a shop truck and a single turbo is still a idea but twins just look cool
  2. giezy

    Block cement to strengthen bottom end?

    Going to do a complete rebuild here on a 7.3 was talking to a diesel builder here and he suggested stud s in the mail with a gurddle of some kind day small amount of block cement to stiffen the bottom end. My plan was to lower the compression a little with some custom slugs and have them...
  3. giezy

    using 450 spindels on a 250/350 truck

    Are the brakes interchangeable then whant to convert to ten bolt wh3els and run the Dana 80 rear without the bad ride ov the f450 and all the new rules to go with it . Hoping if any one new the king pins were the same on the front of a 450 and a 250/350 twin beam ?
  4. giezy

    using 450 spindels on a 250/350 truck

    Want to convert front of dully to ten bolt and then swap the rear end to match. To licence the truck were I live is a big hassle cause the weight and I already have a good running truck now
  5. giezy

    Body swap questions

    That's what I thought going to look at it first see how rusty it is first
  6. giezy

    Body swap questions

    Read some were that a mid 70' s truck has the same floor plans are trucks Friend whats to trade some stuff for a long box ext cab 77 the same as my 94 would like to swap the body from the half ton to my frame
  7. giezy

    v-10

    They have coilpack issue every now and then and last with the proper maintainece
  8. giezy

    97 f250 cc short box real?

    Ya Rockwood Ontario you may be farther north than me! I am about a hour west of Toronto. The truck from Texas and Arizona around here go for big bucks to looked at a cc dully a while back and it was mint with 250k on it wanted ten grand for it but it had paint on the frame!
  9. giezy

    97 f250 cc short box real?

    No no half ton crew cabs here it will get a d60 swap! Going to see it this weekend
  10. giezy

    97 f250 cc short box real?

    I know it s no mustang just never herd of a short box. The guy already dropped the price to 2800 . If I could swap my harness and idi over to it I have a guy that can get me a southern box. Then swap my front shetmetal to the truck and register it as my 94 for emissions exempt
  11. giezy

    97 f250 cc short box real?

    And the wires and hoses arn t cut so reassembly would go good to I. Hope
  12. giezy

    97 f250 cc short box real?

    He has the rad support ic and rads and a egine with blown piston. The rest of the running gear is there just apat for engine removable going to see how the rest of the truck is . Would like to put a zf5 and hydro boost as well just getting in to ps territories foe the first time here would make...
  13. giezy

    97 f250 cc short box real?

    going to look at a truck like this but never heard of it? Has blown motor and no front clip or box and what s 3000 for it. I have my 94 I could steel parts from and get a rebuild long lock for it but what is it worth in the end , he says it is rare
  14. giezy

    Would a bronco frame be the same as a 2wd half ton?

    How do the aftermarket controllers work it?
  15. giezy

    Would a bronco frame be the same as a 2wd half ton?

    The thing is is he is going to pay me to do this work! Providing the rails are straight and there height is the same as the 76 I did than it should be a now brainer the cow as a bolt in subframe complete with rack and pinion steering in one good unit, the have big brakes. But the one thing I...
See more

Latest posts

Forum statistics

Threads
91,304
Posts
1,129,965
Members
24,110
Latest member
Lance

Members online

Total: 755 (members: 9, guests: 746)

Share this page

Top