Search results

  1. giezy

    Block cement to strengthen bottom end?

    Just planning this out before spending money never thought of the oil cooler though. I did this to a 454 race motor and worked fine. Not looking to build crazy hp just a tq mother for some fun dd to toot around in like a shop truck and a single turbo is still a idea but twins just look cool
  2. giezy

    Block cement to strengthen bottom end?

    Going to do a complete rebuild here on a 7.3 was talking to a diesel builder here and he suggested stud s in the mail with a gurddle of some kind day small amount of block cement to stiffen the bottom end. My plan was to lower the compression a little with some custom slugs and have them...
  3. giezy

    using 450 spindels on a 250/350 truck

    Are the brakes interchangeable then whant to convert to ten bolt wh3els and run the Dana 80 rear without the bad ride ov the f450 and all the new rules to go with it . Hoping if any one new the king pins were the same on the front of a 450 and a 250/350 twin beam ?
  4. giezy

    using 450 spindels on a 250/350 truck

    Want to convert front of dully to ten bolt and then swap the rear end to match. To licence the truck were I live is a big hassle cause the weight and I already have a good running truck now
  5. giezy

    Body swap questions

    That's what I thought going to look at it first see how rusty it is first
  6. giezy

    Body swap questions

    Read some were that a mid 70' s truck has the same floor plans are trucks Friend whats to trade some stuff for a long box ext cab 77 the same as my 94 would like to swap the body from the half ton to my frame
  7. giezy

    v-10

    They have coilpack issue every now and then and last with the proper maintainece
  8. giezy

    97 f250 cc short box real?

    Ya Rockwood Ontario you may be farther north than me! I am about a hour west of Toronto. The truck from Texas and Arizona around here go for big bucks to looked at a cc dully a while back and it was mint with 250k on it wanted ten grand for it but it had paint on the frame!
  9. giezy

    97 f250 cc short box real?

    No no half ton crew cabs here it will get a d60 swap! Going to see it this weekend
  10. giezy

    97 f250 cc short box real?

    I know it s no mustang just never herd of a short box. The guy already dropped the price to 2800 . If I could swap my harness and idi over to it I have a guy that can get me a southern box. Then swap my front shetmetal to the truck and register it as my 94 for emissions exempt
  11. giezy

    97 f250 cc short box real?

    And the wires and hoses arn t cut so reassembly would go good to I. Hope
  12. giezy

    97 f250 cc short box real?

    He has the rad support ic and rads and a egine with blown piston. The rest of the running gear is there just apat for engine removable going to see how the rest of the truck is . Would like to put a zf5 and hydro boost as well just getting in to ps territories foe the first time here would make...
  13. giezy

    97 f250 cc short box real?

    going to look at a truck like this but never heard of it? Has blown motor and no front clip or box and what s 3000 for it. I have my 94 I could steel parts from and get a rebuild long lock for it but what is it worth in the end , he says it is rare
  14. giezy

    Would a bronco frame be the same as a 2wd half ton?

    How do the aftermarket controllers work it?
  15. giezy

    Would a bronco frame be the same as a 2wd half ton?

    The thing is is he is going to pay me to do this work! Providing the rails are straight and there height is the same as the 76 I did than it should be a now brainer the cow as a bolt in subframe complete with rack and pinion steering in one good unit, the have big brakes. But the one thing I...
  16. giezy

    Would a bronco frame be the same as a 2wd half ton?

    More so talking about the front of the frame. And yes he wants to lower the truck like a 2wd blazer and have a slammed street truck that is different. Trying to convince him to use a 2004 up crown Vic front suspension and four bar the rear I think it would turn out nice. I installed a Vic...
  17. giezy

    1987 F-350 Crew Fummins build

    Should be a fun ride when done drove a 77 drumlins with a zf5 and was a good truck to drive seams to be the right bit of everything in the drive train
  18. giezy

    Would a bronco frame be the same as a 2wd half ton?

    He wants to do it to a 86 bronco so length isn't a issue just the front stuff he doesn't want the four drive cause it will never see snow and he isn't a off road guy
  19. giezy

    Would a bronco frame be the same as a 2wd half ton?

    friend and I are having a discussion he thinks he could bolt a 2wd 1/2 ton ona bronco frame
  20. giezy

    using a F450 powersteering pump without hydroboost.

    I just stuck a bolt in a chunk of hose and clamed it never leaked a bit
  21. giezy

    using a F450 powersteering pump without hydroboost.

    I did that same thing for a couple months
  22. giezy

    New axles front and new

    Divorced 205 mabe a 203/205
  23. giezy

    New axles front and new

    Thanks just what I was looking for I am going to be going from a 2wd to 4x4 to how does it ride now found a complete 08 chassie this week end for 1000
  24. giezy

    New axles front and new

    thinking about getting some 05 and newer front and rear axles but, I have a e4od and my question is . Will the rear diff have the sencer to run the computer in the trans? Can pick up a matched Set with 4 wheel disk s and 410's for a grand and then run the newer metrick bolt patern wheels
  25. giezy

    Any one use bell tech stuff to lower there truck

    Friend says he got this stuff brand new it is a 4/6 inch drop with a c notch will it be good foe a 2nd dully and still tow the same

Latest posts

Forum statistics

Threads
91,280
Posts
1,129,753
Members
24,098
Latest member
William88

Members online

Total: 480 (members: 4, guests: 476)

Share this page

Top