Recent content by CJCJ

  1. C

    FS: 1990 F250 7.3l Turbo

    I posted this same truck a while back. I realized later that it was with a different user name and zero posts. Below is the link to the Craigslist ad. http://portland.craigslist.org/wsc/cto/3385382705.html The truck has had a lot of items replaced since I've owned it. I was originally...
  2. C

    Auto Insurance and our trucks.

    Wawanesa is worth a shot. I received a quote from them that looked reasonable for a 6 month quote....it was a 12 month quote. Quite pleased with their service as well.
  3. C

    Water Leak

    pffft....all worked up over nothing. Haha Great. Thank You
  4. C

    Water Leak

    Hi all! Water is leaking on passenger side up near the firewall. Seems to be engine side as far as I can tell. It has left a puddle twice. It seems to be leaking more water today. Does not smell or look like coolant. I ran with the defroster on for about 45min. into work, checked the truck 2...
  5. C

    Slow heater blower motor speed?

    Hmmmm..... http://www.dlcparts.com/images/BoschGuide.pdf
  6. C

    Slow heater blower motor speed?

    Would it be possible to show a quick sketch of the mod sir?
  7. C

    Is Add-a-Leaf the Answer?

    I'd imagine a new alignment would be in order. I may just try some Bilsteins and see what they do as the I'm not too impressed with the Rancho9000's. The adjustability is nice but....I need to get off those front stops.
  8. C

    Is Add-a-Leaf the Answer?

    Jake, how far off the bumps are you now? Just curious since I added new springs, tie rods, ball joints, pivot bushings this last summer and my truck is exactly 1" off the bump stops after 8k miles on the new components. Any bump that is tall and short has the fronts hitting the stops. Knowing...
  9. C

    Broken Fuel pickup

    Maybe you could bend the tabs on the wiper arm to ride just inside of the worn arc?
  10. C

    Tilt Steering Disassembly

    Thank You Sir!
  11. C

    Tilt Steering Disassembly

    Could someone please explain to me how to remove the tilt mechanism? I have the column disassembled to this point: I need to take it down to this stage to install a new actuator lever yet all I see are 2 threaded pins at 3 and 9 o'clock on the tilt housing: I apologize for...
  12. C

    Please walk me through installing a new ignition switch.

    By "slider switch" you mean the switch at the bottom of the column? I went to start the "Mastodon" and it was hard to turn and then a popping noise. The key switch will move to all positions and the rod appears to move good.(except for some play from the off to on position) Yet the it will...
  13. C

    fuel selector Problem

    I don't know about the schematics being the same but mine ended up being the fuse, it must have worked it's way out 4x'in. :dunno
  14. C

    Trip from #$@* is over.....rear tank inop?

    I'm dealing with a similar issue so I had the manual out. Maybe this will help diagnose the valve. It's for a 1990 7.3L
  15. C

    clunk

    Same here, rebuilt the entire front end and still the clunk. I got 3/4 of a turn out of the tranny cross member bolts and that fixed it. Well except for the slap of the leaf springs.(the plastic bushing had given out on a brand new set of springs) stuffed a new one in there and no more noise...
See more

Latest posts

Forum statistics

Threads
91,314
Posts
1,130,186
Members
24,121
Latest member
720Diesel

Members online

Total: 682 (members: 9, guests: 673)

Share this page

Top