jaed_43725
Need Quad Cab 4x4
I am changing my rotors today and may have a few questions. I have one right now actually. Do you need a press to press out the studs or will a hammer and wood work?
A hammer will work. Make sure you get them seated fully when you put them back. It's a good idea to torque lugs a couple of times after you drive it so to make sure you have them seated correctly.
I use a 4 lb matter to remove and then press them in. They come out easily enough but it takes a lot of force to get them fully seated. Would not advise pulling them in with the nuts, can mess up the threads.