85_IDI_4x4
Full Access Member
i have read that running gears shorter than 4.10 or tires taller than 35" can cause pinion failure in the 10.25. I know some guys on here have done one or both of the above and wonder how there pinions are holding up.
I have a project i slowly am building and plan on running at least 4.10 gears and tires in the 38" to 44" range. It is an offroad only toy so cruising speed does not matter. Only getting through mud and down trails and up hills. It is a 6.9 with a t19 and sterling 10.25 axles. Dont know what tcase, only that its a BW. Any suggestions on what gears would be a good choice would be appreciated.
I have a project i slowly am building and plan on running at least 4.10 gears and tires in the 38" to 44" range. It is an offroad only toy so cruising speed does not matter. Only getting through mud and down trails and up hills. It is a 6.9 with a t19 and sterling 10.25 axles. Dont know what tcase, only that its a BW. Any suggestions on what gears would be a good choice would be appreciated.