GOOSE
Happy IDI'er
Has anyone used an IDI for a stationary power plant? I may be getting a saw mill that's powered by a 65 hp V4 Wisconsin. Problem is, the engine drives the mill off of the operators side currently via belt drive and you have to walk around it to move the cut boards.
My thought is to put an IDI with a T19 mounted in a truck frame on the back side of the mill and connect it with a drive shaft. 1st gear in the T19 and about 2600 rpm will get me the 500 rpm shaft speed I'm looking for. Anybody use an IDI in a similar application?
If things go well, I may be repowering a wood chipper with an IDI as well.
Sent from my SM-G960U using Tapatalk
My thought is to put an IDI with a T19 mounted in a truck frame on the back side of the mill and connect it with a drive shaft. 1st gear in the T19 and about 2600 rpm will get me the 500 rpm shaft speed I'm looking for. Anybody use an IDI in a similar application?
If things go well, I may be repowering a wood chipper with an IDI as well.
Sent from my SM-G960U using Tapatalk