Search results

  1. snaponprofile

    Intake manifold Gasket

    Well folks Im changing my intake manifold gasket. It came in the mail today and one of the ports was slightly bent. So I straightened it out a little, should I be worried? I will probably put a VERY light coat of RTV copper on the face of the one that was bent right before installation. I...
  2. snaponprofile

    Need a new banks turbo, anyone have a spare??

    Hey guys I need a new turbo, my turbo was over spinning and it destroyed itself. Now it has worn too much to be rebuilt. I need a new banks turbo or else a turbo that I can retrofit in place of it. I already priced out a new charger directly from banks for $1625. WAY TOO MUCH FOR ME. I...
  3. snaponprofile

    Thoughts about turbo and oil

    Hey guys. I have just been thinking through some of the issues my truck was experiencing when my turbo blew. I will be getting news from my turbo rebuilder on monday on whether or not my turbo is rebuildable.(He went down to .010 on the housing so he is going to see if he can get larger...
  4. snaponprofile

    PSD alcoa OEM caps...Anyone have a set?

    PSD alcoa OEM caps...Anyone have a set? thanks.
  5. snaponprofile

    F350/250 steel wheels with good 265/75/16 tires.

    I have here the set of wheels that came with my truck. I replaced the 2 front tires about 10K miles ago, they have barely worn. I spent $400 on them alone. The two on the back are slightly thinner but all 4 of them passed inspection. You can see in the pictures the tread. It has lots of life...
  6. snaponprofile

    Where can I find a set 0f D60 spindles????

    Hello all, I am in need of some new D60 spindles and seem to have trouble tracking them down. Does anyone have a idea on where to get them?? Anyone have a spare set?? Thanks
  7. snaponprofile

    D50 with 4:10's only 110K on it...going to scrap

    If you want it call me at 34720943zero 5. comes with leafs and new bushings if you want them. $100
  8. snaponprofile

    F250 and F350 pitman Arms ARE DIFFERENT!!!

    After experiencing less turning radius after my D60 swap, I decided to look more into my f250 pitman arm. I had read and heard from several members that they were the same as the f350 ones. But a guy on psn said they were different, and stated that the f350 ones were longer. So I purchased a new...
  9. snaponprofile

    sway bar from a 97' f350 D60 front

    Nice Stabilizer bar off a 97' D60, I had it on mine, just bought new links. I just installed air bags though and its one or the other apparently.......so if you want it, call me 347209430five. $150 with new links($30 each new) PICK UP ONLY, thanks :thumbsup:
  10. snaponprofile

    WTB 4 inch rear lift blocks.

    WTB 4 inch rear lift blocks.
  11. snaponprofile

    Parts, parts, parts!!! OBS

    TTB 50 with add a leafs in it - Make offer(NOT SHIPPING AXLE) I can sell the knuckles, axle shafts separate if you only want certain things. D50 brake parts that are rather new, calipers, rotors, pads(can be spit up), - $60 + shipping Moog steering linkage that I got this fall(barely...
  12. snaponprofile

    Overhaul on front end(pics heavy)

    Hello to all fellow members. Two weeks ago, I started this rebuilding 'journey' by picking up a D60 from a guy. I then replaced the ball joints and axle U joints on it and then gave it a fresh coat of POR 15. So I pulled the truck into the shop, dropped the D50, and proceeded to instal the D60...
  13. snaponprofile

    Getting a RSK kit. What DON'T I need??

    D60 Swap Hey guys, I am getting a 3inch RSK kit for my truck and am wonder what I absolutely need? They recommend longer shocks, but I just got new KBY's and they are pretty good. Do I absolutely NEED longer shocks? How about the drop pitman arm, can I get away without that? Thanks
  14. snaponprofile

    E4OD for sale, E4OD parts also.

    Ford Rebuilt E4OD with 15K on it. Great shape, was put in 3 years ago and !5k miles was put on it. It ran perfect. 4x4 tailhousing. Make a offer E4OD parts: Torque converter, flexplate with no cracks, cooler lines, drive shafts, crossmember, transfer case skid plate. - Almost anything E4OD...
  15. snaponprofile

    ZF reverse lights.

    I understand that the trans has a plug on the side of it with two wires coming out of it, is that a switch? If I put the trans into gear, does that just complete the circuit? I was just planning on running a wire from my fuse panel to that switch and then to my backup lights. Is there a easer way?
  16. snaponprofile

    Ford Rebuilt E4OD for sale

    Here is the thread on FTE, if you don't have a fte account, pm me here on OB http://www.ford-trucks.com/forums/1095193-ford-rebuilt-e4od-for-sale.html Make a offer!!!
  17. snaponprofile

    Throw out bearing

    Hey guys, I have my trans out while doing my rear main and I need a better throw-out bearing. The one in the LUK set was mostly plastic and it made alot of noise with the clutch engaged. Where do ya'll get yours? I would really like a all metal one, these plastic ones don't seem to be that hot...
  18. snaponprofile

    Rusty sending line from tank to selector.

    Rusty sending line from tank to selector. The two lines coming from the rear tank that go to the selector are really rusty and fuel is bleeding through, Where do they sell replacements? Can I just use large brake line or rubber fuel line?
  19. snaponprofile

    The oil leak location: unknown!!!

    Ok guys, I have some more info on a oil leak that is really bothering me. As some of you might know I have had my truck parked for the last month while I get my turbo figured out, long story, don't ask. But, I have not started the truck in at least a week and oil is leaking. Not AS much as when...
  20. snaponprofile

    Rebuild Kit for banks sidewinder, bearings don't fit?!!

    Hey guys, when I was rebuilding my turbo, the bearing I got from my rebuild kit didn't fit onto the wheel shaft. So I used the old bearings that had just about no wear. I toasted the bearings when I started it because the oil in the feed line wasn't there and the turbo ran with no oil:mad...
  21. snaponprofile

    7.3 Rollback with sleeper!! CL

    Just found this, has two axles too.....enjoy. http://cnj.craigslist.org/ctd/2611827779.html
  22. snaponprofile

    Oil leak has me stumped.

    Hey Guys, as some of ya'll know, I am searching for a oil leak and I have ruled out several things but come up with very little answers. I found out today that I have a good working CDR and it is functioning perfectly. I also found that there is alot of oil coming out of the turbo cold...
  23. snaponprofile

    Is it possible to weld on the valley pan?

    Hey guys, I am at my wits end here with my banks drain tube leaking oil where it enter the valley pan. I have replaced the grommet 2 times and it still starts to leak within a couple months!! I am considering welding a hose barb onto the valley and then connecting a hose to the drain tube. Any...
  24. snaponprofile

    Where does the valley drain drain?!

    Hey guys, I am fixing my oil leak(or one of them) and am wondering if oil leaking in the valley would end up on the back of the oil pan, starter, etc. In other words, where does the valley drain spit out whatever is draining?
  25. snaponprofile

    Oil drain grommet banks turbo

    Hey guys, as we all know, the banks turbo kits get messy underneath the turbo after a while, I fixed this oil drain grommet about 4 months ago and it is leaking again:( I have a spare, so I will be fixing it this weekend but has anyone figured out a way to make this connection leak free?? It is...

Latest posts

Forum statistics

Threads
91,299
Posts
1,129,926
Members
24,108
Latest member
Lance

Members online

Total: 458 (members: 9, guests: 449)

Share this page

Top