Search results

  1. 0

    Snap on MT480 timing meter.

    I got this awhile back and I have used it about 6 times to set the timing on various trucks. I have not used it in about a year. It has been kept in the house in a box for the last 6 years I have had it. All connections are in good working order. Comes with both luminosity probes (MT160 &...
  2. 0

    Zd9's, racor manual prime fuel head, air filter, throttle cable,head set.

    AIR FILTER 94 TURBO MOTOR ONLY LEFT! I am no longer needing idi parts so im cleaning up the shop. All parts are new including the manual prime fuel head and clear bottom. It was in a plastic bag on the bottom shelf of the work bench and a starter had gotten pushed into the filter thats why...
  3. 0

    WTB running engine 70605 Louisiana.

    I am looking for a running engine either a complete motor or a long block. I can use a short block but it will have to a be 7.3L. Mileage is not a factor truck currently has 317k. I do not want to rebuild an engine. I just did a full rebuild on an engine for my PSD. Let me know what you...
  4. 0

    Timing covers?

    So I need a new one for my 7.3 turbo motor. Are the timing covers all the same throughout the years? 6.9-7.3? I changed my water pump and found mine looking like Swiss cheese. I barely touched it with a screwdriver and it went straight through. I tried to patch it with the welder but no...
  5. 0

    String of bad luck. Promar engine gone

    So I have been out of the country for sometime with work (had to do two cycles in a row). I got home on the 28th to spend sometime with the wife and kids. Decided I would go get the truck at the shop where it has been sitting for awhile. Its about a 45 minute drive so we met my brother and his...
  6. 0

    Lots of water in oil pan. where to start? Asking for a friend...

    My friend has a 92 idi and yesterday he called me upset that he now has milky oil. Crazy thing is he just drove it (8 days ago) 700 miles to florida and picked up a used rzr. Nothing seemed out of place and nothing went wrong. He changed his oil system and had 1-2 gallons of water come out. He...
  7. 0

    SPINOFF: Aluminum injector return rail.

    Not to take away anything from ADV, (heck if he had sets to buy i would get one). But with all the buzz in his thread i thought it might be better to put our thoughts here instead of getting that one too clutered up. I just want to get the thoughts of the members on this forum before getting...
  8. 0

    New truck; milky oil, hard start.

    I traded my offroad rig for a 1994 turbo diesel idi. The truck has 316k but honestly runs great. My dad had a 6.9 that had 645k when he finally sold it. And ran great at those miles. Anyways I drove about 7 hours, inspected the truck, oil, coolant, all the fluids, drove it, asked a lot of...
  9. 0

    Back in the IDI game again. lake charles, la

    I had an 84 but i sold it. Now i pick this one up this past week for a steal over in texas. 94 xlt 5 spd 4x4 pretty decent shape. needs a few things here and there nothing major.
  10. 0

    Injector pump and injectors

    I pulled the pump, lines, and injectors out of a free vehicle someone gave me he said it didn't run but i drove it home n hour later. I drove it about 15 miles homes from a country farm. Ran great i am building the engine for my truck. So i have a working ip and 8 injectors. Asking 250...
  11. 0

    Block heater humm?

    So its gonna get cold tonight. So i figured why not plug in the block heater. Well when i did it buzzes kinda loud. When i unPlug it the buzz goes away? Is this normal for the idi? None of my newer diesels do this? Any help i dont want the idi to catch on fire or something.
  12. 0

    Old fuel for free?

    My uncle has three 55 gal drums of off highway diesel. It has been closed up tight for 4 years. Do i need to burn it or is it still safe to run in farm equipment. If i do use it what should i do to it to make it " safe" to use?
  13. 0

    Exhaust tailpipe exit?

    If yall the chance to change your exhaust up where would yall move the tail pipe to? Stacks are out of the question but im game for amything else before rear tire, after rear tire, out the back, maybe even a hood stack? What do yall think?
  14. 0

    Banks turbo BAD oil leak!!!!

    So im cruisinghome from work the other evening and i noticed my oil pressure dropping slowly i made it home and the gauge was between the N and O. Do yall think any damage was done to the motor it took 3 quarts to top it off? So this afternoon when i got home from work again i checked it out...
  15. 0

    Van turbo in a f-series

    Hey yall just wanted to get some opinions. I scored a free 85' e-350 with a banks non-gated system on it. (The rearend was locked up). So my thought was can i put it on my f-350? I just looked at both instructions on the bankspower site and the two systems look different but they do the same...
  16. 0

    Picture request

    I was wondering if someone could take a picture of their injector pump and post it. I think i am missing a linkage piece or something! And a FSS. Does anyone have a manual shutdown.
  17. 0

    6.0 acting up and stumbling

    So i have an 04 and it is being really weird. All of a sudden it is stumbling and missing and blowing greyish smoke out the tailpipe. It has an egr delete and studs. No CEL is on so no codes to check. Idk what it up with this thing nothing i do will change what it does. Filters and oil have...
  18. 0

    Cruise control in a 1984

    Does anyone know of a good guide to trouble shooting the cruise in a 1984 f-350. Mine doesnt work and idk if i even have all the parts there for it to work. I have the servo, cable, and the buttons on the steering wheel but what else it there. There has to be a brain or something right? And...
  19. 0

    Isspro tach R8503

    So i have the above tach in my truck. I am missing the magnets that go on the crankshaft damper. My question is can i use any magnets or do i have to spend the 30 dollars for their magnets and epoxy stuff. Or can i get around using them or whatever tell me yalls opinion.
  20. 0

    Dual range rewire for a manual trans?

    I pulled a dual range out of an auto 4x4 truck and i am putting it in a 4x4 manual trans. So i dont really need the stuff that the auto control box has. I was wondering how to kinda make my own harness and can i use just a plain rocker switch or something similar? I just want to do this right...
  21. 0

    GV for a 2wd c-6 tranny

    So i picked this thing up from a local guy around deridder it came out of a 86 f-350 CCLB. It was put on in 97' and had about 55k on it. The owner took me for a drive in it and it shifted great no shudder or hesitation. i would like to get 500 obo. This man has about 12 ford trucks. He owned...
  22. 0

    Ultimate score today. GV and Dual range

    So i got a GV for a 2wd c-6 and a dual range for a manual tranny 4x4 both in perfect working order. All the electronics came with em. They came out of running vechiles that have ran in the last year ill post pics in a sec im just really excited!
  23. 0

    96 12V in an 04 f-350

    So my 6.0 took a poop in a bad way. Heads are shot both are cracked and not repairable. soo i have this old 96 12v that i picked up for free because the people thought it was frozen and no good it wasnt. My question is the flywheel out of my zf6. Do you have to buy a special flywheel to make...
  24. 0

    E-350 banks turbo on a F-series

    My question is how hard is it to retrofit a banks turbo system out of a 1985 e-350 into a 1984 f-350? The turbo system has 40k on it and the whole system will cost me 400 bucks. Thats why i was wondering if it could be done easily.
  25. 0

    1985 E-350 diesel cabriolet with GV & Banks

    Ok here is the skinny on this fat betty. I saved this thing from my old neighbors house down the road they have had this thing since as long as i can remember. Well the old couple finally gave it up i couldn't let them sell it to anyone else. It ia 2wd and has a banks turbo kit that was...

Latest posts

Forum statistics

Threads
91,316
Posts
1,130,204
Members
24,123
Latest member
HarleyCummins

Members online

Total: 645 (members: 4, guests: 641)

Share this page

Top