tbiagent69
Full Access Member
Hello,
I am stuck in San Diego after driving in this morning. Over the last couple days I have had to shift almost to 2 to get it in drive (c6 trans). I did not think much of it, but this morning my friend was moving the truck to our camping area and the shifter would move freely but the trans does not shift out of reverse.
I traced the problem to the shift lever on the trans itself. When you move the shifter it simply rotates on the shaft, looks like a press fit is worn out or sonething.
I have never heard of this. Is it common, or is there any way to fix it in the field? There does not appear to be any missing hardware or anything but it can be hard to tell considering the 27 years of grease and oil built up everywhere.
Thanks for any help!
I am stuck in San Diego after driving in this morning. Over the last couple days I have had to shift almost to 2 to get it in drive (c6 trans). I did not think much of it, but this morning my friend was moving the truck to our camping area and the shifter would move freely but the trans does not shift out of reverse.
I traced the problem to the shift lever on the trans itself. When you move the shifter it simply rotates on the shaft, looks like a press fit is worn out or sonething.
I have never heard of this. Is it common, or is there any way to fix it in the field? There does not appear to be any missing hardware or anything but it can be hard to tell considering the 27 years of grease and oil built up everywhere.
Thanks for any help!