rental freeze plug installer

[79jasper]

Click on the pic.
Or right click, then click view full size.

Sent from my USCC-C6721 using Tapatalk

 

[jcarter1979]

pic

Click on the pic.
Or right click, then click view full size.

Sent from my USCC-C6721 using Tapatalk

wont change on my end don't no

 

[79jasper]

:doh
I can't find the original in the tech section.

Sent from my USCC-C6721 using Tapatalk

 

[jcarter1979]

priced a new tool just a few min ago 240 now

 

[jaluhn83]

The only real critical dimensions are:

OD of the driver tool - 1"
OD of the sleeve tool - 1 1/2"
Protrusion of the driver below the bottom of the sleeve - ~0.010"

The bottom of the sleeve tool needs to be concave to roughly match the freeze plug, with the most critical part being the outside edge, since this holds it into the block.

Driver needs to be a good sliding fit within sleeve.

 

[riotwarrior]

priced a new tool just a few min ago 240 now

buy one of the ones for sale in Marketplace custom made...then you have one Price is very very fair too btw