Injector fuel lines

[mabc926]

Void

Void

 

[hesutton]

Buy the correct new/used injection lines. They are all equal length for a reason. If two of the 8 are different lengths, the timing of injection will be off and it will run like garbage.

Heath

 

[SoWoCo]

IFS carries them in stock http://www.ifsinternational.com/

 

[gonecrazyi]

Shoot me a pm, Ive got a bunch of spare lines sitting around in boxes.

 

[plywood]

Here is a set on ebay.

http://cgi.ebay.com/ebaymotors/ford...r_Truck_Parts_Accessories&hash=item35a91f9545

 

[icanfixall]

When replacing hard lines there is something people miss... Thats the vibration line dampners. Each side of the motor has two clamps. They need to be installed. If you leave them off you will continue to break lines because of the line vibration. The injection pump creates lots of fuel pulses and that makes a vibration that breaks lines. They can't be repaired. I found this out the hard way and it cost me almost $400.00 at the dealership many years before this site was found by me... Now I'm way past not knowing how to keep the money in my pocket.....

 

[plywood]

They can't be repaired.

Ahhhh, I'm sure a little JB Weld would do it.