Homemade return line kit

[MidnightBlade]

would it be possible to make your own return lines from the injectors to whereever it goes? i know i will need the copper washer, o-rings, and the plastic thing around the body of the injector. or would i be better off just to buy this one http://cgi.ebay.com/ebaymotors/1991-1994-IDI-7-3-7-3L-Ford-injector-return-line-kit-_W0QQcmdZViewItemQQhashZitem3a628ec2d8QQitemZ250761626328QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories or wont that work on my early 1991

 

[gatorman21218]

just send a pm to typ4. He sells them for around 35 bucks and it comes with everything you need.

 

[grog85]

You don't need the copper washers, those are for the bottom of the injector where it seats in the head. You can match up the o-rings easily, and you don't necesarrily need the new plastic caps if yours aren't cracked.

 

[gatorman21218]

Yes that ebay item is what you are looking for

 

[MidnightBlade]

Yes that ebay item is what you are looking for

i think i will order it from typ4 that way i know who im dealing with, the 5 extra bucks is worth the peace of mind

 

[dyoung14]

Ok you can re-use the plastic caps as long as they are not cracked, go to your local napa, or other auto parts store or possibly a tractor supply, you need the #111 standard o-rings, then get 6 feet of line proper size, and you will only have 10 dollars in it thats what i did works perfect

 

[Exekiel69]

Unless You are in a tight spot, it is better to just buy a new kit and Typ4 will definitely know what You need. Those T caps are plastic and You'll get an air leak sooner than later.

 

[dyoung14]

If i had the money i guess i would throw return line kits here and yonder but i aint got money to be throwing so anything that saves me a buck helps me out