Glow plug test ?

[pwjackson]

I have an ohm meter to test my glow plugs with, do I need to place one lead on the blade at the top and the other on the tip of the glow plug?

 

['94IDITurbo7.3]

I believe that is how it is done with an ohm meter. a test light is much easier if you have one.

 

[jim x 3]

PW:

One lead on the blade at the top and the other on the threaded metal body with hex head.

Regards,

 

[Diesel_brad]

PW:

One lead on the blade at the top and the other on the threaded metal body with hex head.

Regards,

What he said. You should have 0 ohms

 

[dsltech83]

What he said. You should have 0 ohms

Actually a new beru is about 0.9 ohms, IIRC. Depends on quality of the meter though.