Well finished hooking up Radiator and power steering pump remounted.. Crawled under the truck and removed the pickup after cleaning the area and removing fuel/return lines and electrical. Pulled the unit out and the shower head is was still in place but seemed to be a little loose. So I took it off and put on a piece of fuel line with hose clamp and barbed brass fitting with slots in it so it will suck to the bottom. finger crossed and tried to start truck but NO go.. It still seems as if the pump is getting air because I am getting a pulsing of fuel not a steady flow. I turned the fuel pump on and crawled under the truck and removed the return line and get steady fuel out of it and I can hear it running into the tank.. I have a another question from the fuel filter head unit (feed line to the IP) there is a small fitting that has a line going to the first injector. I assume it is to help prime the system. When I turn the pump on It pulses and looking at the fuel pump filter the fuel level goes up and down and I really do not get a steady flow of fuel at the shreader valve.. Just a thought while typing this up maybe I an bypassing to much fuel to the tank and not much getting into the IP..
Any thoughts
Thanks in advance
Chris
Any thoughts
Thanks in advance
Chris