engine mounts

[bj_idi]

has anyone used these mounts from rock auto? they are around 11 each. open to suggestions
Thanks
http://www.rockauto.com/en/moreinfo.php?pk=227979&cc=1124660&jsn=582

 

[SPR1NK]

they look just like the ones i got from Napa, could always try them and send them back if they aren't right or seem like they aren't going to hold up

 

[chillman88]

Let me know if you try these. I've been noticing a knock when I shut off mine. I'm pretty sure its a bad motor mount.

Can they be changed without removing the engine? I'm sure it'd be a tight squeeze.

 

[bj_idi]

Will do, I'm not 100% but you might be able to lift it a bit and change them out or one at a time

 

[Thatoneguy]

Could try the block of wood on a jack and lift a little from underneath to swap them without removing the motor

Sent from my VS980 4G using Tapatalk

 

[IDIBRONCO]

They can be changed in chassis, but like Chillman88 said, it's a tight squeeze. If you can lift up the driver's side and remove the motor mount, it makes changing the oil cooler a little easier since you have more room. If you have access to a cherry picker, then you have a good way to lift the side of the engine.