I noticed mine does it a lot (to Me) and I think that may be the cause of vibration I have on the shifter some times. It is minimal but I'd like to address this, so anyting I can do to reduce or eliminate the play?
Thank You.
Thank You.
If the play you are looking at is the rotation of the pinion yoke into the differential that may not be abnormal. There is clearance between the ring and pinion gears, the spider gears in the differential don't fit particularly tight and the axle splines are not a very tight fit in the axle gears.
Jim
Carrier bearing. I think http://www.rockauto.com/catalog/x,carcode,1126730,parttype,10436 is it.
If you pull the metal outer piece that the two bolts go through off of the rubber part you can then pry the rubber part off of the bearing. It is not readily visible but it is in there.
Jim