C6 problems

[Sorro71]

My C6 auto has had a leak for a couple of months from around the selector shaft. I changed the seals on that two weeks ago bit there is still a small amount leaking from what I think is the intermediate band adjustment. It's a thread with a locknut just in front of the selector shaft. Is there a way to seal this up properly? I've attached a photo of the area, sorry the orientation is a bit out. I've never owned an auto before any advice would be appreciated.

You must be registered for see images attach

 

[OLDBULL8]

This might help.

 

[Sorro71]

Thanks OLDBULL8. The manual is pretty vague on it.
I've checked other things like the fluid level at operating temp and if the breather is clear. I just didn't want to tear into it, especially if its a band adjustment.
With my luck I'd just end up with a bigger mess.

 

[Sorro71]

I've found out some more about it. The locking nut has a seal. It just doesn't show up on any of the component breakdowns that I could find. I'll purchase one and change it out.

You must be registered for see images attach

 

[icanfixall]

Having never actually seen this seal I was wondering why this did not leak more on other C6 trans bands adjustment. See... I learned something today.....