BigRigTech
Diesel junky
Let the fun begin....We swapped one of my parts mule boxes on to the truck this afternoon, I'll get started on the repairs tonight. Needs some floor/wheel tub work and 2 crossmembers replaced. The truck frame and cross members looked good, nothing to need repair. The rear sill of the cab needs a little repair but nothing serious for an 17yr old truck from the rust belt. I'm going to clean up the frame and undercoat it with dripless oil before the box goes back on.
I need a favor from a BOOB man in the south with a rust free bed ....Could someone give me exact measurements to the middle box hold-down bolts and how thick the 2 crossmembers are above the rear axle. I bought some steel but I want to try and avoid shimming the box on the frame upon reinstallation. Mine was so rusted it was impossible to measure them.
I need a favor from a BOOB man in the south with a rust free bed ....Could someone give me exact measurements to the middle box hold-down bolts and how thick the 2 crossmembers are above the rear axle. I bought some steel but I want to try and avoid shimming the box on the frame upon reinstallation. Mine was so rusted it was impossible to measure them.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Last edited: