leftcoastjeff
Frankentruck lover
I have had some considerable issues whit the truck and have worked some of them out.
Bad glow plugs, Bad lift pump. these seem to be fixed.
Now I get a 10 second glow with no after-glow, ( no biggie, it was 2 seconds before, I may go with the manuel push button)
I now get a stream of fuel out of the shrader valve on the fuel filter. ( after replacing the lift pump, what a PITA.)
Now I get a very soft click from the fuel solenoid on the IP and no fuel to the loosened injector line.
I know that there is some crap inside, can I remove the little cover on top of the IP where the hard return line comes from? also has the fuel shut off solenoid and the cold advance wires attached to it?
I used a wire from the hot side of the battery to the terminal closest to the front and heard a loud click a couple of times, then only a soft clicks after that.
So again, can I remove that cover to try to get that solenoid going again?
Thanks in advance,
LCjeff
Bad glow plugs, Bad lift pump. these seem to be fixed.
Now I get a 10 second glow with no after-glow, ( no biggie, it was 2 seconds before, I may go with the manuel push button)
I now get a stream of fuel out of the shrader valve on the fuel filter. ( after replacing the lift pump, what a PITA.)
Now I get a very soft click from the fuel solenoid on the IP and no fuel to the loosened injector line.
I know that there is some crap inside, can I remove the little cover on top of the IP where the hard return line comes from? also has the fuel shut off solenoid and the cold advance wires attached to it?
I used a wire from the hot side of the battery to the terminal closest to the front and heard a loud click a couple of times, then only a soft clicks after that.
So again, can I remove that cover to try to get that solenoid going again?
Thanks in advance,
LCjeff