So I notice my alternator wasn’t charging and went to replace it today. When I took it out I noticed that 1 of the wires on the 2 wire plug was completely broken. I believe these go to the voltage regulator. I removed the connector and crimped on some spade connectors, but after installing the new alternator it is still not charging. I am thinking I may have gotten the 2 wires switched. 2 questions.
1. If I swap the 2 plug wires at the top of the alternator could I fry it, or would it just not work?
2. Which pins on the voltage regulator plug do I jump to full field the alternator to see if the voltage regulator is the issue?
Pics for reference.
Sent from my iPhone using Tapatalk
1. If I swap the 2 plug wires at the top of the alternator could I fry it, or would it just not work?
2. Which pins on the voltage regulator plug do I jump to full field the alternator to see if the voltage regulator is the issue?
Pics for reference.
You must be registered for see images attach
You must be registered for see images attach
Sent from my iPhone using Tapatalk