79jasper
Chickenhawk
But both of those had big engine options from the factory.
Apple's to oranges.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Apple's to oranges.
Sent from my SAMSUNG-SM-G935A using Tapatalk
You must be registered for see images attach
You must be registered for see images attach
I have poured over the data and I am going to put a 7.3 IDI into a fox body one day. I did the measurements and all, and it wont be that hard.
How do you figure that it's crazy?is that an Isuzu?
is that an Isuzu?
How do you figure that it's crazy?
because running numbers is 1 thing, but actually getting into a project of this caliber is a whole other league.How do you figure that it's crazy?
because running numbers is 1 thing, but actually getting into a project of this caliber is a whole other league.
ive done uni body work, theres nothing easy about it.. lots of work
have you seen my latest project?
Yessir. An 05' LLY
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
It's the same mounts and such as a big block. The front will be down a hair more than an all iron 460. A few people have already put PSD's in a fox body. Checkout the Corral. They have a few builds on there of that.
I have a IDI in a 63 falcon.
my boats don't work inside the parameters of an IDI, but im still keeping the twin PSD in the 10M as an optionI'm waiting for you to put one in a boat.
again,
running numbers, and looking at build sites on the internet are 1 thing....
I never said it cant be done.
I have a IDI in a 63 falcon.
would be the same amount of work with a powerstroke
I've done some swap stuff, but not with an IDI. I guess nobody will ever know until it's tried. And if it don't fit there, then I'll put one in a Crown Vic. There is absolutely no reason it can't fit there.
Also the PSD in anything is a lot more wiring.