Search results

  1. Dave Barbieri

    Spring cleaning

    Using FedEx's webpage, it looks like around $10.50. To get a better idea, go to the auction page and enter in your zipcode. It'll give you your shipping cost, so you can figure total price and if it's worth bidding/buying. My .02..... Thanks for the interest!
  2. Dave Barbieri

    PARTING OUT!! Complete '86 F350 turbo

    What shape is your steering column in? How much for the steering column and steering wheel? Thanks!
  3. Dave Barbieri

    Spring cleaning

    That pedestal came with an 088 kit I bought over 10 years ago. I've installed an 093 setup on my truck and that's one of the parts still sitting on the shelf. HTH
  4. Dave Barbieri

    Spring cleaning

    Clearing out my ‘spare parts inventory’. Need the space for more parts. LOL http://www.ebay.com/itm/182015348493?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Wagner clutch master cylinder http://www.ebay.com/itm/182015342985?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649...
  5. Dave Barbieri

    Fuel filters on ebay

    I've put these on ebay. The primary filters are large and have a water separator and drain. I used an aftermarket filter head and mount them between each fuel tank and my facet pump. Primary filters with water separator and drain...
  6. Dave Barbieri

    Somebody shoot me!

    Yup, 37 vehicles in 40 years of marriage, some of them seriously memorable. :eek: Marty has been VERY patient. And understanding. On our wedding night, she looked lovingly into my eyes and said, "Sweetheart, daddy taught us girls to do two things really well. Shoot pool and shoot...
  7. Dave Barbieri

    Somebody shoot me!

    You're right, ARP studs don't stretch. Several years ago, the accepted procedure for installing the studs was to install the heads and torque the nuts down in sequence, loosen them, then retorque. This procedure was repeated three to five times, depending on your upper body strength, your...
  8. Dave Barbieri

    Torque Spec

    14 lb/ft on the 4 bolts. That comes from the 1984/1985 Ford shop manual for the 6.9 motor.
  9. Dave Barbieri

    quick question kinda important about oil

    No damage. For short term use, to get you to the store tonight, this'll work. Keep in mind that semi-syn oil is a mixture of conventional oil and synthetic oil, so all you're doing is changing the percentage of synthetic oil to conventional oil. Gas engine oil doesn't have the additive pack...
  10. Dave Barbieri

    6.9 keeps shutting down

    Is this fuel not getting to the injection pump, or fuel not getting form the pump to the injectors? To determine this, the next time it quits on you, pop the hood and look for the schraeder valve on the secondary filter head. That's the filter mount that bolts to the passenger-side cylinder...
  11. Dave Barbieri

    Plastic pilot bearing?? Are you kidding me??

    That 'plastic' is actually Kevlar. It's supposed to be very effective as a pilot bearing material. I installed one with my new clutch. Didn't notice anything better or worse. It does the job.
  12. Dave Barbieri

    911 members support list info thread

    Gotta update mine, too. Dave Barbieri Rockwall, TX 469.434.2025 Here's what I've got: • Hand tools • 3T floor jack • Jack stands • Factory manuals for an 1985 • Ferret adapter and timing light I'd be willing to bring tools, flashlights and beer 50 miles. Great sense of...
  13. Dave Barbieri

    6.9 Bellhousing dowel pins needed

    PM sent. Thanks!
  14. Dave Barbieri

    6.9 Bellhousing dowel pins needed

    During the rebuild last year, I lost the two locating dowel pins that line up the bellhousing to the back of the block. Anybody have two of these for sale?
  15. Dave Barbieri

    6.9 Bellhousing dowel pins needed

    During the rebuild last year, I lost the two locating dowel pins that line up the bellhousing to the back of the block. Anybody have two of these for sale?
  16. Dave Barbieri

    DO NOT BUY!!!!!

    Thanks Gary. That'll save some potential heartbreak! I'm too old to enjoy surprises and finding out I've got the wrong part in the middle of a repair is a REAL surprise.
  17. Dave Barbieri

    Killer deal on NEW starters!

    Thanks for the heads up BD. I just ordered one! ;Sweet
  18. Dave Barbieri

    seel clutch MC and steel cluthc line?

    Greg - I purchased a Wagner for my 85 from RA. The picture showed a metal body master cylinder and that's what I wanted. When it showed up, the body was black plastic - totally different from the picture. The MC I was replacing was an Exedy and it was metal, so I re-ordered an Exedy master...
  19. Dave Barbieri

    New and Used 6.9 & 7.3 IDI parts.

    If Al didn't get the IP, I'd be interested.
  20. Dave Barbieri

    Valve Cover Emissions Decals

    That is outstanding!! I'm going to check around here in Tyler and see who can do the hi-temp vinyl thing. I finished rebuilding my engine 1500 miles ago and this will be the PERFECT finishing touch for my valve cover! Thanks Sam. YOU'RE A GENIUS!!!
  21. Dave Barbieri

    New brake rotors too large (thick) ?

    Thanks for the reminder! My break-in procedure is pretty close to what is described: 1. 10 medium-speed stops (35 - 40mph) with moderate even pedal pressure. 2. Drive for 15 - 30 minutes to cool down the rotors before stopping the vehicle. I usually do the break-in on a long road out...
  22. Dave Barbieri

    New brake rotors too large (thick) ?

    Yup. Those are the pads I chose. Wagner and Bendix still manufacture the stuff for our trucks right here. ;Sweet
  23. Dave Barbieri

    New brake rotors too large (thick) ?

    Speaking of cheap Chinese parts..... Yesterday, I received my Rock Auto order for pads (PGD668C) and rotors (96154R) for one of our cars. Both boxes are stamped Raybestos Professional Grade. Both are stamped "Made in China". :eek: :eek: Finding non-Chinese aftermarket parts is...
  24. Dave Barbieri

    Kicking myself in the a$$

    Has your shop run the engine to operating temp and then done their checks? This might be an issue that only shows up when everything is hot and expanded, or immediately after shut down. Like Gary stated, cylinder pressure and oil pressure all drop to 0 when the motor stops. This might be when...
  25. Dave Barbieri

    Turbo seals leaking oil, just want confirmation

    Tell the folks that the o-ring is for automotive applications - it needs to handle hot engine oil. "Regular" o-rings that I see at the hardware store/Tractor Supply/Atwood's/Whatever are usually designed for home use (plumbing). They're not gonna last. 160 degree hot water is NOT 240 degree...

Latest posts

Forum statistics

Threads
91,309
Posts
1,130,079
Members
24,117
Latest member
olsen726

Members online

Total: 771 (members: 12, guests: 759)

Share this page

Top