Search results

  1. tractorman86

    wmo & fuel pumps

    so, its been awhile since I've been on here has anybody figured out the best electric fuel pump to run while you're burning waste motor oil? I'm in a situation where I am currently using my idi as a daily driver again and the Holley fuel pump is going out again as I knew it would... any help is...
  2. tractorman86

    pyrometers

    i remember a while back there where a few people looking at the auber instruments pyros, how are you guys liking them? are they worth their money? i know that oftentimes the initially cheaper route often becomes the most expensive due to rework so i am trying to save myself and hopefully others...
  3. tractorman86

    i need front end help

    so i'm trying to get the brown truck back up to snuff while still on a limited budget and i have LOTS of work to do, that being said, i need some help with the steering. i installed a d60 highpinion balljoint out of a 95, and all the steering rods are either bent or wore out... so does anyone...
  4. tractorman86

    someone left a present on my doorstep today!

    can anyone guess what this might be that I had shipped to my door for $8? let's just say I'm happy little girl today! Lol :sly;Sweet
  5. tractorman86

    motor mounts

    its motor mount time... has anyone found something better for these beasts? i used anchor(checker/oriley) brand last time and i have decided i don't want to this time, maybe a poly, even a solid if i have to. the ol'girl hasn't moved much in the last year or two because of funds, lack of spare...
  6. tractorman86

    evilbay find

    it really pains me to not be able to buy this right now but here you go looks like this might be a good bye for somebody, it does look like the most important parts are all there but the actual turbo is a little rough...
  7. tractorman86

    check out this great deal!

    ^^link^^:sly hey guys i know i haven't been on here for a while, just busy as all hell recently. but i have fallen on some what hard times and unfortunately need to sell some stuff so i just thought i'd say hi and get a little attention to my item in the marketplace. thanks
  8. tractorman86

    Factory 94 turbo and snail 093

    this turbo is a rebuild done by a very reputable shop in phoenix,az(Turbo Electric) about 4 years ago, money has just been tight and now i need to let it go. when rebuilt it got a new w/g(someone dropped it and bent the hell out of the original), compressor wheel, and all seals and bearings. The...
  9. tractorman86

    Scored on evilbay

    I've been keeping an eye out for a tuner for a while now and I finally got luckey last night, I bought an edge juice premium with attitude. It is used but he says it is in good working order with all wiring harnesses, monitor, and egt probe. Here's where the luck came in, I got it for $100 and...
  10. tractorman86

    Cool cl find

    http://phoenix.craigslist.orgt/cph/pts/2694770477.html Might make for a nice addition to an idi
  11. tractorman86

    Valve lash on ford industrial 4 cyl

    We have a wiggins 6k lb forklift that has what I believe is a ford 172. It is running pretty bad and it sounds like the valves are way out of adjustment. Does anyone know the lash spec off hand, or know where to find such specs?
  12. tractorman86

    Left on the road...

    So I was on my way to work in laughlin this afternoon I get to Nothing, az and ironically my truck has nothing. I had the cruise set at 75 and started to loose speed, no big deal it has turned off the cruise on it's own before, so I try to kick her in the guts...no go, I look at the gauges and...
  13. tractorman86

    dana 50/ 4" lift

    Trying to get rid of my old axle and lift off of my 91' f250 in my sig. It's a rancho 4" lift, complete minus spring bushings. The axle is missing one brake caliper, one locking hub is trashed I think and the center pivot bushings are worn out. I am asking $400 for the lift and $100 for the...
  14. tractorman86

    4" rancho lift

    http://phoenix.craigslist.org/wvl/pts/2552903938.html I just thought I'd give you guys a heads up on this one
  15. tractorman86

    Strait axle conversion

    So I'd like to put a strait axle under the f150 in my sig and I have a dana 44 out of a74 f100, only problem is that it has drum brakes. My question is, would I be able to swap the split44 knuckles onto the 74 strait 44 giving me a strait axle with disk brakes?
  16. tractorman86

    93 f150 5.8 tach

    The tach has been erratic and completely quit on me for like 15 miles so won't shift right being an automatic. So how does system this work?
  17. tractorman86

    name that part

    so my buddies dad bought a 6.9 to replace a 7.3 that had scored the cylinders and this is somehow tied into the Gp harness. i've never seen one before, is something he needs or should he just cap it off when he puts the 7.3 Gp system on?
  18. tractorman86

    electric fuel pump

    I didn't want to hijack ghunts thread so here goes. What is stopping us from using a 2000 powerstroke fuel pump in conjunction with a bypass regular after the underhood filter/separator?:dunno And just send the filtered and bypassed fuel back to the tank through the fsv. Napa sells the quick...
  19. tractorman86

    C6 gear-vendor

    So a Guy I know has an 86 f250 2wd supercab longbed 6.9 c6 with a GV. he said if I can come up with a stock tailshaft and driveline for his truck I can have the grear-vendor. the question is, is there any difference in a diesel tranny and a bigblock tranny? Also does anyone have a spare...
  20. tractorman86

    fuel heater help

    Ok so normally I would do a search and answer my own question but my phone is the only way I can get on here right now and my phone wont let me type in the search box... so when the fuel heater on top of the fuel filter starts leaking how do you seal it back up or is it better to just replace...
  21. tractorman86

    tightening up my front end

    So I know shackle reversals are all the new rage these days and would love to have the time and money to do one, I just dont. :rolleyes: so instead I am doing new shackles and spring eye bushings. I will be taking pics along the way but will have to wait to post till I get home
  22. tractorman86

    My Tennessee Thanksgiving

    Well I'm spending my vacation in Irving college TN. i wanted to take the idi. It it just wasn't quite as affordable as the flight... Went to fall creek falls yesterday and the chickamagua battlefield museum. Being a desert rat this is all pretty amazing to me. Just thought I'd share this with ya
  23. tractorman86

    1964-66 truck VIN help

    So where do I find the vin on my truck, I want to sell it but the title I got with it dosent match the door which is obviously not the original door, any help is greatly appreciated.
  24. tractorman86

    where are they built

    Just have a random question. Which plant would a 4wd 92 f150 be built?
  25. tractorman86

    another turbo thread...

    Okay so some of you might remember me. I used to be very active on here but all this year i have been working in laughlin nv. anyway working up here I think I can deal with my truck being downed for a little bit. I have an ats 093 turbo freshly rebuilt but nothing else. On the other hand my dad...

Latest posts

Forum statistics

Threads
91,306
Posts
1,130,044
Members
24,117
Latest member
olsen726

Members online

Total: 719 (members: 6, guests: 713)

Share this page

Top