Search results

  1. D

    200k

    I am at 215,000 today.
  2. D

    WMO Facts from Army research

    I found this article while trying to find out if I could run WMO without any problems. I tried 1/4 tank of 50/50 blend and felt no power difference. But since this is my daily driver I'll keep running #2.
  3. D

    WMO Facts from Army research

    I have been researching about WMO for awhile and have found this about the Army's experience and recomendations. Just a little info. I know that the link is long but it's a quick read and worth it...
  4. D

    WMO question for the GURU's

    JP-8 is jet fuel. Every day we dump about 2 gallons of it for fuel samples out of the birds. All of our ground support equipment runs on it. Which most of them have really nice 4 cyl detroits. Gotta love a 4cyl that can pull 26,000 lbs around.
  5. D

    WMO question for the GURU's

    I want to run a mix of 50/50 JP8 and WMO. Will this work well. Both of which I can get for free. And what do I filter the WMO with? Thanks. Also do I need to start and stop on Diesel or can I run both tanks of WMO and just go for it? Thanks again.
  6. D

    Steering Column

    Today I turned a corner and my steering column locked up and when I forced it to turn it ground up something inside and now is really stiff and hard to turn. Does anyone make a steering column rebuild kit? Thanks.
  7. D

    Free front bumper

    You should see how the people here in Ca eat the BBQ that I make. I use Sonny's BBQ sauce to make it and cook it for a few hours. I don't think that I'll be back to Fl for about 3 years. Sorry.
  8. D

    Free front bumper

    My wifes Gramdma lives in Melbourne. Been there a few times.
  9. D

    Free front bumper

    It's the chrome version with the black trim. What part of Fl. I am from Gainesville.
  10. D

    Free front bumper

    It's the 92 non holy version. Sorry.
  11. D

    Free front bumper

    It's the 92 non holy version. Sorry.
  12. D

    Free front bumper

    I built a new winch bumper for my 92 ford and have a good stock one for free if anyone wants it. I'm in California City Ca.
  13. D

    Free front bumper

    I built a new winch bumper for my 92 ford and have a good stock one for free if anyone wants it. I'm in California City Ca.
  14. D

    IDI Conquers Stoddard Valley OHV

    I went to Stoddard Valley OHV today in Ca for a clean up with the Primedia magazines. Any way there is a really big hill that all the jeeps were lined up to try and climb. Most could not. When I got inline they all looked at me funny. I put her in 4 low and 2nd gear. We climbed right up with no...
  15. D

    Bubbles around glow plug

    What does a GP carbon cleaner tool look like, is it a special tool, or can I just use a small wire cup brush? If this is a normal problem then where can I buy one. I plan on having my truck for a long time. ANd since I have the other eng to build I'll probably need the tool more than once. Thanks.
  16. D

    Bubbles around glow plug

    Thanks to an injector dying and spraying fuel all over the intake I found that there is pressurized air blowing by my glow plugs and coming out around them while the eng is running. I have recently replaced the glo plugs and now have replaced the injector that was bad. All of them are tight in...
  17. D

    27 ft trailer for trade

    MudHog I wouldn't mind having that bike as long as it runs well. Isn't that one of those that can be made street legal. I just want to cruise the desert with my kids and wife on thier Quads.
  18. D

    27 ft trailer for trade

    The trailer bed is above the wheels. And is notched at the wheels so the tires won't rub on the bed. It is a 2X8 wood bed for 18 ft and then a metal section just aft of the tounge that is almost 5 ft. Then the tounge is open. The ramps are permentantly mounted to the tail and fold up. The wheels...
  19. D

    bleeding Clutch questions

    I got it at Pep Boys.
  20. D

    bleeding Clutch questions

    I have pushed almost a whole bottle of brake fliud through my new clutch master cylinder and slave cylinder and still haven't got any movement of the slave cyl. Any ideas. The only thing that I didn't replace was the line and it doesn't leak. Thanks.
  21. D

    27 ft trailer for trade

    It uses a 2 5/16's ball and hithces to a bumper. The front two axles are brake axles but the internals are not there. I've never bothered to get the parts for them though. Sorry about not using the other forum. Didn't know it was there.
  22. D

    27 ft trailer for trade

    It uses a 2 5/16's ball and hithces to a bumper. The front two axles are brake axles but the internals are not there. I've never bothered to get the parts for them though. Sorry about not using the other forum. Didn't know it was there.
  23. D

    27 ft trailer for trade

    I have a 27 ft tripple axle flat bed trailer for trade.I have had 14,000 lbs on this trailer with no problems. It uses mobile home axles and a 2 5/8 ball. I want to get a turbo system or a dirt bike for it. If you want pictures I'll send some to you. Thanks. Oh Yeah I am in So Cal but I can take...
  24. D

    27 ft trailer for trade

    I have a 27 ft tripple axle flat bed trailer for trade.I have had 14,000 lbs on this trailer with no problems. It uses mobile home axles and a 2 5/8 ball. I want to get a turbo system or a dirt bike for it. If you want pictures I'll send some to you. Thanks. Oh Yeah I am in So Cal but I can take...
  25. D

    When Did Ford Install a Cummins???

    Okay so now I just need a bunch of cash to buy a Cummins. oh wait I won't have that anytime soon so I'll stick to the IDI.

Latest posts

Forum statistics

Threads
91,339
Posts
1,130,644
Members
24,141
Latest member
Cv axle

Members online

Total: 616 (members: 7, guests: 609)

Share this page

Top