Search results

  1. 1993 f-250

    One of those people

    what a jerk. Hes the one who asked for help and was wanting someone to take time out of their day to read and reply to his post and then treat them like that?? d bag for sure.. and if im not mistaken blue smoke is a bad ip. my truck would do the same thing and actually do it at idle after...
  2. 1993 f-250

    thinkin bout parkin the truck

    im doing the same thing with my truck. I traded the spare motor that i had laying around for a 1992 f 250 gasser cab and front clip. CLEAN too. still gonna blast it and put alot of primer on it. im gonna have to replace the bed too. a bit cancerous but for right now i cant start on it till the...
  3. 1993 f-250

    Stroker swap

    i have all the wireing harness and and complete motor from the powerstroke. i do know that i need the computers since my dad sold them. thanks for the help. sounds like you have done this before. how did it work out for you? im sure its gonna be easy since ill have the cab off and also have the...
  4. 1993 f-250

    Stroker swap

    so i am going to replace my whole cab and front clip with a 92 body. its in alot better shape than mine lol. my dad and i were talking today about it and he came up with the idea of putting his 99 powerstroke in it while it was easy to access. and since i have to change all the wiring over why...
  5. 1993 f-250

    Where to mount cb

    Hahaha gotcha. I read i think on here of some guy using jbweld to put the bracket to the roof. he cut through the head liner and mounted it like that. any input??
  6. 1993 f-250

    Mel, is this going to be the Mega Moose?

    well soundsl like you are first inline for that!! i would love to see these trucks tricked jout like that. MAN!!!!!
  7. 1993 f-250

    Where to mount cb

    wow guys thanks for all the input. and no i do not have an external speaker for this truck. I was thinking about getting one but not until after i mount the cb. I think im gonna put it either on th dash or the roof. then mount an external on th edriver side pillar. Midnight Rider. what kind of...
  8. 1993 f-250

    Where to mount cb

    So since i installed my sub box in my truck( check the sig) i have missed having my cb in there. anyone have ideas on how and where to moung it??????? Thanks y'all
  9. 1993 f-250

    off road fuel?

    Google works wonders.......... http://www.dieseltruckresource.com/dev/fines-off-road-diesel-use-t200418.html?t=200418 Some of it sounds pretty rediculous but i wouldnt pukt it past the state popo to issue these fines. you are the one taking away from their salary so it kinda is like a bonus...
  10. 1993 f-250

    Fan Flies

    well seemingly how i cant reall throw around $350 for a new radiator at the moment im kinda s.o.l. unless anyone in northwest ohio has one for sale. I already checked craigslist with only one within about 50 some odd miles from me. and its out of a van. would it still fit or no?
  11. 1993 f-250

    Fan Flies

    So today i replaced U joints on the rear drive shaft and took the truck for a spin. when i got back i noticed that for all the longer the trip i took the motor warmed up pretty quick. Popped the hood to start to tighten down my valve covers cause i knew they needed it and could smell antifreeze...
  12. 1993 f-250

    Good news and bad news (smoke)

    my truck used to do this when i got off the hiway after about 20 miles. sounded like it was hittin only about half the cylinders half the time. ever hear one of these puppies runnin on 4 cylinders?? It ain't pretty i can tell you that much. got crap for fuel milage and had to poor woter on it if...
  13. 1993 f-250

    Injection pump issue

    Yeah you probably have. my mom live in new riegel now and my dad live north of findlay. mom used to live right outside of bascom towards fostoria. so i pretty much drive all over God's green earth. and turnin it black :peelout
  14. 1993 f-250

    Injection pump issue

    sounds like quite a bit of oil fuel ratio. im starting to run wmo through my truck here hopefully by the weekend. its snowing here in north west ohio however so its flowin a little cold. Next week im headed to ny for spring break with a buddy of mine and we are takin the truck. first long haul...
  15. 1993 f-250

    To Pull or not to pull engine?

    IM talking about the valve covers. i must have another gp down then cause it chirps right upo when its plugged in.
  16. 1993 f-250

    To Pull or not to pull engine?

    I know that i dont have any antifreeze mixing with my oil and its not hydrolocking or missing any at all. i think that i might have bad head gaskets. also i know i need to tighten my valve covers cause they tend to loosen. anyone else have this issue? my moms exboyfriends brother and dad had a...
  17. 1993 f-250

    To Pull or not to pull engine?

    i really think that we should get some more input on this. cause i also have a spare motor with only 80,000 miles on it. i stole the ip off it and the gp controller to put on the one in the truck. the motor in the truck has (As far as i know its the stock motor) a little over 228,000 milees on...
  18. 1993 f-250

    PSD Turbo

    okay. we have the dwhole other psd motor sitting in the barn. if we just transfered the up pipe etc to the idi i know that the turbo would have to be turned and moved alittle bit but would that be a good start in seeing where we are at? I think thats what we'll do is just rip it off the old...
  19. 1993 f-250

    PSD Turbo

    another question. i think what i was trying to say about the manifolds is the exhaust work going ukp to the turbo. ill go out to the barn and take a look tomorrow but does anyone know if i can just use that plumbing for the exhaust?? again thanks ya'll
  20. 1993 f-250

    PSD Turbo

    thanks for the help guys. dyoung14 think you could potentially give a parts and price list so we know what we are looking at? we can acces a pipe bender and my dad and I can weld pretty damn good so i think thatll take a bit of the cost out of the add on. thanks again everyone
  21. 1993 f-250

    PSD Turbo

    Okay i know that dyoung14 was working on putting a psd turbo on his idi. My dad and i were talking about putting his old turbo on my truck and we were wondering about using the same manifolds as the psd. im not sure but i think that it doesnt match up. anyones opiinion on the whole thing would...
  22. 1993 f-250

    truck wont start

    i got a starter from autozone for like 140 with a core charge and a lifetime warranty. already gone through one and on the second one. havent even owned the truck for a year. another thhing too is the connections. make sure that the positive wire is snug on the selinoid. mine decided that one...
  23. 1993 f-250

    Idler Pulley thread

    Hey thanks guys for the help. i know its wanting to start to strip out. do the new pulleys usually come with a new bolt or do i have to try to find another one??
  24. 1993 f-250

    Idler Pulley thread

    in the sig
  25. 1993 f-250

    Idler Pulley thread

    Okay so i have a new belt tensioner that i am trying to put on. the only problem is that i cannot for the life of me get the idler pully off and out of my way. i have a torx 50 bit and ive tried loosening it both directions and just dont have enough ass to muscle it outta there. what direction...

Latest posts

Forum statistics

Threads
91,339
Posts
1,130,625
Members
24,140
Latest member
placidoert

Members online

Total: 260 (members: 4, guests: 256)

Share this page

Top