Recent content by John Haggerty

  1. John Haggerty

    Frame rot

    Me Too! My truck is a frame rust truck too. That is why I'm selling it. The original owner had the frame after market rust proofed. A big mistake. Maryland uses 100% salt for snow. The salt water got behind the rustproofing and did a number on the frame. Engine is fine, the frame scares...
  2. John Haggerty

    Hemi Pedal Linkage Fix, I Broke a Part, HELP!

    Still Need to Get it Right! diesel4me2, Thanks for the help. Jumping the two red wires got her started, but I don't want to run into anything in front of me. Anybody khow to remove this "thing". The thing is right up against the firewall. It appears to split in half to slide over the...
  3. John Haggerty

    Hemi Pedal Linkage Fix, I Broke a Part, HELP!

    I'm fixing, or in this case breaking a few things before I sell my truck to a friend (bascially giving away because he's on hard times). I did the pedal fix and there wasn't mush distance between the new bearing fitting and that safety switch (?). First time I depress the pedal I broke some...
  4. John Haggerty

    Gear Ratio's

    4.10 Not Needed I just bought a 08 CTD with 6 sp. auto and 4.10's. She has so much low end power and with the way the 6 sp. is set up, I don't think the 4.10's are needed. I only got the 4.10's beacuse that's all i could find around with the truck nearest the one i wanted. Got to work on...
  5. John Haggerty

    Maryland, 89 F-250 with Banks Turbo for Sale

    Check out my signature. I'm asking $2,900. Private message me if interested.
  6. John Haggerty

    First Thanks!, Second sorry but SWONK me!

    First I would like to thank everyone for the years of help! Everyone was always knowledgeable and patience. Especially Mel for all you efforts to make this kind of thing work. I will be selling the IDI after I clean it up. I'll be sure to send whomever get's it this way.
  7. John Haggerty

    First Thanks!, Second sorry but SWONK me!

    First I would like to thank everyone for the years of help!:hail :hail Everyone was always knowledgeable and patience.:angel: :angel: Especially Mel for all you efforts to make this kind of thing work.:dunno :dunno I will be selling the IDI after I clean it up. I'll be sure to send...
  8. John Haggerty

    How Much to Pay?

    2008..
  9. John Haggerty

    How Much to Pay?

    I see a beauty at sticker $52K on the lot. What's a good price to pay? Thanks!
  10. John Haggerty

    What's She Worth? $$$

    I'm in Maryland. Still looking at that Class A RV.
  11. John Haggerty

    What's She Worth? $$$

    Just a possibility. I might be selling my truck this summer. Check out my signature. What should I ask? Selling assets to get that Class A RV I got my eye on. Thanks!
  12. John Haggerty

    Front end service

    After 204K miles I had a U-bolt break. Could have been a nasty issue. Replace all 4 for ~ $38.
  13. John Haggerty

    So what did your truck get for Christmas

    A "REAL" battery charger. She sat for 3 months and was dead on Christmas. I suspect it was a radio short/draw. No more of those $39 chargers!
  14. John Haggerty

    Maximum Oil Temperature?

    So this past weekend I trailered the boat home (from Canada) thru the hills of NY and PA on I-81. Maintaining 70+ mph and about 2,750+ rpm the truck ran excellent! Often at 950+ egt and 9+ psi (intercooler still on the floor of the barn)! Banks says not to exceed 240 deg oil temperature. I...
  15. John Haggerty

    Intermittent and normal low high wipers just stop

    I did the solder thing in the module and that took care of all my wiper problems years ago. However, I wasted money thinking it was a switch or wiper motor.
See more

Latest posts

Forum statistics

Threads
91,310
Posts
1,130,159
Members
24,121
Latest member
720Diesel

Members online

Total: 590 (members: 10, guests: 580)

Share this page

Top