http://www.ebay.com/itm/Ford-E40D-E...-nut-set-/260991785894?_trksid=p2054897.l4275
http://www.ebay.com/itm/Ford-Truck-...seal-Kit-/250759574857?_trksid=p2054897.l4275
^ that comes with the updated viton seal.you don't need to replace the bushing unless yours is worn.if it's worn and you need to replace the bushing anyway,then it would be a good idea to go ahead and install the k062 kit too since it's got a very nice bushing with knurls to help it from spinning and an enlarged drainback hole built right into it.to top it all off,you'll have increased lube volume not just higher pressure like the transgo mods make.however both are awesome upgrades.
http://www.bulkpart.com/2/product/E4OD-4R100gasket/36309E.html
^ x9
http://www.bulkpart.com/2/product/E4OD-4R100washer/36210G.html
if you dont get a k062 kit,i dunno if the tugger kit comes with it or not (trans shop installed that one in chip truck during reman) but the E40D-HD2-D reprogramming kit doesn't come with the updated aluminum drain back valve to replace the plastic one...........but it should!
you can buy it from these guys separately;
http://www.sonnax.com/parts/2067
the tugger kit costs more than transgo's E40D-HD2-D reprogramming kit because it comes with many more parts that you would install during a reman.they will be going unused in your case,so you may want to opt for the lower cost kit,like i installed in log truck.
http://www.transgo.com/products.php?cat=E4OD_4R100&homeinclude=catalog&category_id=80&parent_id=80
^ just scroll down.
is your head spinning yet? lol
http://www.ebay.com/itm/Ford-Truck-...seal-Kit-/250759574857?_trksid=p2054897.l4275
^ that comes with the updated viton seal.you don't need to replace the bushing unless yours is worn.if it's worn and you need to replace the bushing anyway,then it would be a good idea to go ahead and install the k062 kit too since it's got a very nice bushing with knurls to help it from spinning and an enlarged drainback hole built right into it.to top it all off,you'll have increased lube volume not just higher pressure like the transgo mods make.however both are awesome upgrades.
http://www.bulkpart.com/2/product/E4OD-4R100gasket/36309E.html
^ x9
http://www.bulkpart.com/2/product/E4OD-4R100washer/36210G.html
if you dont get a k062 kit,i dunno if the tugger kit comes with it or not (trans shop installed that one in chip truck during reman) but the E40D-HD2-D reprogramming kit doesn't come with the updated aluminum drain back valve to replace the plastic one...........but it should!
you can buy it from these guys separately;
http://www.sonnax.com/parts/2067
the tugger kit costs more than transgo's E40D-HD2-D reprogramming kit because it comes with many more parts that you would install during a reman.they will be going unused in your case,so you may want to opt for the lower cost kit,like i installed in log truck.
http://www.transgo.com/products.php?cat=E4OD_4R100&homeinclude=catalog&category_id=80&parent_id=80
^ just scroll down.
is your head spinning yet? lol
Last edited: