'94IDITurbo7.3
HAMMER DOWN!
another installed pic
You must be registered for see images attach
Glowshift Gauge Install: Boost, Pyro, & Tranny
- Thread starter '94IDITurbo7.3
- Start date
Ididriver
Full Access Member
Is it just the lighting or is the boost gauge a different color than the other two?
Anyways looks great. Different color then my blues tho.
Anyways looks great. Different color then my blues tho.
'94IDITurbo7.3
HAMMER DOWN!
i think it is just the angle and the lighting. i have two different blues. a dark and a light. the pic is of the light blue.
'94IDITurbo7.3
HAMMER DOWN!
thanks Jeff!
Ididriver
Full Access Member
How hard was it putting in the probe for the trans temp gauge.
Thinking about getting some more gauges.
Thinking about getting some more gauges.
Ididriver
Full Access Member
How hard was it putting in the probe for the trans temp gauge.
Thinking about getting some more gauges.
Thinking about getting some more gauges.
Nothing to it, just pull the pipe plug out and screw in the sensor. Pressure test port plug, drivers side, just forward of the shift lever.
'94IDITurbo7.3
HAMMER DOWN!
yep, real easy just as oldbull said.
'94IDITurbo7.3
HAMMER DOWN!
just a couple more.
my Daystar firewall boot. cost about $15 dollars, but is worth it i think. makes running wires and such threw the firewall really easy.
You must be registered for see images attach
my Daystar firewall boot. cost about $15 dollars, but is worth it i think. makes running wires and such threw the firewall really easy.
You must be registered for see images attach
Last edited:
snaponprofile
Full Access Member
Good job 94', looks quite familiar, you will be happy with them.
'94IDITurbo7.3
HAMMER DOWN!
thanks snapon.
tonight was the first night that i drove with them. HOLY CRAP. these things are frickin' awesome at night. i switched them to read. i like that for night. it is more of a glow.
tonight was the first night that i drove with them. HOLY CRAP. these things are frickin' awesome at night. i switched them to read. i like that for night. it is more of a glow.
IDIMAN94
Registered User
Nice looking gauges. Thanks for the pics. 
Just hope you didn't cut the pyro probe wire to length. The gage is calibrated to the length of wire that came with it. Didn't see anyplace you coiled it.
'94IDITurbo7.3
HAMMER DOWN!
i didn't cut cut it. it is coiled up top near the brake master cylinder and valve cover away from any hot/moving objects.
