quickster
Latest activity Postings About
-
-
I actually have a '01 f550 in my shop that just had a new engine put in it. Guy bought it to me saying " the truck runs great but will... -
quickster replied to the thread new gauge,no boost.I actually did it while the truck was running and it didn't move. I'll try again tomorrow. But at least I'm getting boost.
-
quickster replied to the thread new gauge,no boost.the inlet is pretty tight. I loosened up the jam nut thats against the housing and it barely moves.
-
-
quickster replied to the thread new gauge,no boost.So I went outside and ran the truck with the boost line in some water. I bubbles up so I'm getting boost. I don't see how turning the...
-
quickster replied to the thread new gauge,no boost.Thanks. I was just going thru old threads and seen where you mentioned that. I'm going out now to give it a shot.
-
Hey all, I installed a boost gauge and I'm not getting any reading. There are no exhaust leaks, and the snail is tight. It's a glowshift...
-
Yea and if the square peg dont fit in the round hole, grab a bigger hammer.
-
quickster replied to the thread Parting 1994 7.3 IDI TURBO engine.That's the right one. That and the dipstick and tube. Let me know how topay and I'll get youmyaddress. Thanks
-
quickster replied to the thread Parting 1994 7.3 IDI TURBO engine.Hey. What's the status on the parts? I will taketh airbox and trans dipstick and tube . Just wanted to see if the box was correct. Let...
-
quickster reacted to IDIBRONCO's post in the thread So what did you do with your truck today? with
Like.
Well I was on the road again. I left at 4:00 PM Thursday and got back to town just after noon today. I took one staircase to outside of... -
quickster replied to the thread Parting 1994 7.3 IDI TURBO engine.Thanks for getting back. Is it the j style, 93-94?if you can send a pic to [email protected] if it's the correct one I'll take it off your...
-
quickster replied to the thread hissing sound after shutdown.Those vacuum lines tend to rub on parts and get worn thru very easily. Air filter cover did it to mine.
-
quickster replied to the thread Parting 1994 7.3 IDI TURBO engine.Air cleaner assembly if you have it. Thanks
-
quickster replied to the thread 1994 IDIT parts or complete F350, CC, 2WD, E4OD Only needs a head gasket to run..do you want to part with the air cleaner assembly? And I'm in the market for the trans dipstick and tube . Just did a 093 turbo install
-
quickster replied to the thread Transmission dipstick and tube.The 99-03 has a good bend in it to go around the up pipe. This is killing me cause I'm just about done and I can't find the right tube.
-
-
Loading…
-
Loading…
