WhistlinDiesel
Registered User
This is a picture before I cleaned all under it and all that seal off…but what is that tube coming out? Is it a breather?
You must be registered for see images attach
Does any of your alls truck have it? Do any of you all know what the part is called so I Can the original part on?I believe it is just meant to be a drain point in case the rear main seal or transmission input shaft seal leak.
My own humor states that that drain is part of the waste oil ejection system that NASA engineers at IH designed to coat the chassis in oil so it lasts as long as the engine.
More specificly, I believe that's for a E4OD transmission. Looking at the picture again, that's exactly what it's for. They may have been used with C6s, but I don't remember seeing them. It's factory. It's supposed to be there. Nothing to worry about. I'd be MUCH more worried about why someone decided to seal the inspection cover to the transmission.Flywheel inspection cover for automatic.
Well it does this cold and when hotYour injector pump is failing when it does that. It's called the hot start issue. It happens because your internal parts are worn to the point that they gave a hard time pushing enough fuel when they're warm/hot. You can do the Band Aid trick of pouring some lukewarm (not cold) water over the pump. That will cool it off enough that it will start easier. Your pump only has a limited life left and will need to be replaced. You will also need to replace the injectors at (about) the same time because they wear at the same rate as the pump does. If you replace either the pump or injectors and not the others, you can sometimes fix one problem and cause others.
....it’s having hard start after being left for ~30mins and I
think maybe a seal went bad and it looses prime possibly??