Search results

  1. L

    looking for part #'s for moog ball joints on my 1996 dana 50

    Does anybody know what the part number's are for upper and lower balljoint's from moog is for my dana 50 ttb on my 96, all part's store's are wanting arm and leg was just gonna order off amazon but didnt want to get the wrong one's. And are the one I need splined or just flat? I know its 4600...
  2. L

    truck died while driving

    Last night was driving down the interstate and my truck just completely shut off and wouldn't start back, put a new cps on it and still no start. any ideas???? thanks:dunno
  3. L

    need help on rear axle pinion bearing truck is down

    I was thinking my pinion bearing was shot cause a couple day's ago I had found my pinion nut came loose on me some how, so I started driving it again and it started to make a popping noise so I figured it messed up my bearing when it came loose. I took everything out of the rear end and the...
  4. L

    advice on taking 94 factory turbo off

    alright guy's im bout to attempt to take the factory turbo off for a guy on his 94, does anybody have any tip's or advice before I try taking it off. Ive taken off a powerstrokes before but is it harder then it? thanks
  5. L

    not staying charged

    okay so I just bought a 1998 12 valve and it is not staying charged, it was a 24 valve and they done a swap and put a 12 valve in it, the batteries will charge up but after driving for 20 minutes the volt gauge will go to 0 and nothing electrical work's, put a new alternator on it and still the...
  6. L

    what could i get out of it

    Thinking about putting my truck on ebay, was wandering if anybody could guess what i could get out of it? 220,000 miles 1989 ford f250 5 speed 4x4 runs great
  7. L

    jerking in front end

    1989 ford and i just got done putting a new front end on cause some of my ring gear teeth were broke and my 4x4 wasnt working. So i switched it all out for another f250 front end that i baught thinking it has to be a 4:10s, so i looked at the ring gear on it and it has the same exact amount of...
  8. L

    starts and then shuts off

    i have a buddy says his 2001 dodge starts then shuts off, he says he's put all new filter's and lift pump and still does it anybody know what it could be?
  9. L

    fuel in valley

    does anybody no what could the common problem most likely be on a 96 that is leaking fuel into the valley pan
  10. L

    leaking oil

    alright i gotta find where this oil leek is coming from this time, but first off about a month ago the ebv actuator rod started leaking down in behind the engine so without looking further into it we thought it was a rear main so we ended up jerking the tranny out putting a new seal in and...
  11. L

    engine missing

    so my truck is still missing i dont know what it is, when i get on it it will miss then when i get the rpm's up it will go away, then i've also noticed when im driving sometime's when i have my foot lightly on the throttle you can here it in the sound's like it jumping or something. Was told it...
  12. L

    first time truck pulling

    so im gonna be pulling my truck for the first time tomorrow just wanna have a lil fun and see what it feel's like, anybody got any tip's on which gear to put it in? i was gonna do second gear 4 hi but i dont know if that's the correct choice.thanks;Sweet
  13. L

    jingling noise out of exhuast

    okay i just put new o rings on my turbo pedestal and deleted everything ebv wise and now i have like a jingling noise when i first started it, took it for a drive for bout a mile and it stopped, now when i get on it and let off it just has a wierd noise to it, thanks
  14. L

    ebv actuator leaking oil

    so my ebv was leaking oil really bad, so took it off now trying to figure what to do i wanna delete it all but ive read where you can just weld the hole where the rod goes, anyone done this? im on a tight tight budget i just dont want to waste 170 on a delete pedistal thanks
  15. L

    clutch advice

    well im going to be replacing my dreaded dual mass flywheel and i might as well buy a clutch to because the ts is getting the best of it, im going to be buying stage 2's soon and a d66 and intercooler, what would yall recommend in the hp range for a clutch, 500? and would it hurt anything buy...
  16. L

    missing going through gear's

    so got the ts chip for my truck and its starting to sound like it has a miss in it when u put it to the floor changing gear's, it does it in all the setting's and stock setting, does anybody know what this could be? thanks
  17. L

    dually wheels on single wheel rear end

    is there any difference in single axle rear end's if im wanting to switch over to dual wheel's on the back?
  18. L

    would this gauge stil work?

    http://www.ebay.com/itm/BRAND-NEW-DODGE-DIESEL-COMBO-GAUGE-BOOST-DIGITAL-EGT-AND-TRANSMISSION-TEMP-/270826543313?hash=item3f0e8518d1&item=270826543313&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr i found this gauge and i really like it, it say's just for dodge though, dont want to sound...
  19. L

    why want tuner's work on obs's

    so i was wandering my uncle has a diablo Predator for his 99 powerstroke why want these tuner's work on obs truck's? we were going to plug it in but dont want to fry anything;Sweet
  20. L

    headlight switch acting up

    okay so my headlight switch has been acting up on my 89 ford for a while now and just when im driving down the road the park light's and headlight's start blinking off and on, so on my old switch i would have to find a sweet spot as i called it when both the park light's and headlight's work, so...
  21. L

    done the 10k mod

    so yesterday done the 10k mod,im pretty impressed i can feel the diffrence in power, blows a lil puff of smoke out now while changin gears, i also noticed my truck use to act like it was missing when i would rev it up now it doesn't do it anymore;Sweet i got the ebvp on switch so jus for play i...
  22. L

    screen in the fuel tank?

    i was watching a video on youtube and it says there a screen in the tank where the fuel is pumped from, i have no bed on the truck right now and i was going to pull it out and check to see if there is any crudd in it. is there any way of letting air into the sytem if i take it out and check it...
  23. L

    bad camshaft position sensor

    can a bad camshaft position sensor cause missing:dunno, my truck misses when i rev it up then when it misses it blows some blue smoke. need help asap thanks
  24. L

    stage 2 injectors

    well i've been looking for some injectors, and i looked on rosewood diesel shop and they have stage 2's the budget built, Overhaul, 160 cc upgrade, new Nozzles flow 80% over stock,With correct supporting mods, these arecapable of around 400 hp for $885 and thats if i send in my old injectors, i...
  25. L

    turbo blowing oil out of intake side

    so my turbo is blowing oil out of the intake side of the turbo, dont really know much about these trucks so what needs replaced? seals?

Latest posts

Forum statistics

Threads
91,292
Posts
1,129,831
Members
24,106
Latest member
lewisstevey7

Members online

Total: 693 (members: 6, guests: 687)

Share this page

Top