Water Pump. What's that port for?

[Kizer]

I may be the only one that doesn't know... I was wondering if I could use it in plumbing a water cooled turbo.
Thank you.
Kizer

 

[riotwarrior]

You JUST may want to explain...WHAT port you are referring too.

 

[laserjock]

I am assuming you mean the two pipe plugs in the top??

You must be registered for see images attach

The one on the left is the return from your heater core. The one on the right is normally plugged. I am not sure which side of the impeller its on but I think it's on the pressure side. If you don't get an answer shortly, I'll look at the one on the shelf. I plumbed my water cooled turbo feed from the port in the dr rear head. Return via custom manifold in the heater hose system.

 

[rustygold]

I use that other port for coolant temp it's within 5 degree of the block temperature

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[typ4]

Those are low side ports. Not pressure. Get those from the heads.

 

[rustygold]

Yeah it was easier for me at the time I was going to move it to the head when put my turbo on it

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Kizer]

You JUST may want to explain...WHAT port you are referring too.

Laserjock is correct. I'm referring to the normally plugged port.
Thanks