dsblack
Full Access Member
This has been a long on going issue that I have had no luck fixing.
I had a pad come apart on the right rotor on the truck about 2 years ago. Ruined the rotor.
So I changed out the rotors, and new pads. Then I got a slight vibration and found the rotors were out of round.
Had them turned, And this repeated 3-4 times. once I added changing the calipers, once the brake hoses, and once the MC.
So I decided that the problem was the cheap rotors that I got. Took it in and had new USA high quality rotors put on it.
Guess what.... it's back.
I also added a new brake controller for the TT.
Also when this happens the truck pulls slightly right when driving, and hard left when breaking.
Turn the rotors and everything is fine. Drives streight, stops streight, and vibration goes away.
Also the truck doesn't stop very well unless you really get on the pedal.
What gives? And where do I go from here?
Thanks
I had a pad come apart on the right rotor on the truck about 2 years ago. Ruined the rotor.
So I changed out the rotors, and new pads. Then I got a slight vibration and found the rotors were out of round.
Had them turned, And this repeated 3-4 times. once I added changing the calipers, once the brake hoses, and once the MC.
So I decided that the problem was the cheap rotors that I got. Took it in and had new USA high quality rotors put on it.
Guess what.... it's back.
I also added a new brake controller for the TT.
Also when this happens the truck pulls slightly right when driving, and hard left when breaking.
Turn the rotors and everything is fine. Drives streight, stops streight, and vibration goes away.
Also the truck doesn't stop very well unless you really get on the pedal.
What gives? And where do I go from here?
Thanks