track bar mount

[joe f350]

ok the po of my truck mounthed the track bar for my d44 on top of the axle and the other end weild to the frame right in front shock mounth and i know my d60 tackbar has diffrent mounts http://www.fourwheeldriveliftkits.com/ford-1980-97-f350-4wd-track-bar-bracket-4.html is this the right mount for my truck for the front cross over

is thisight track bar http://cgi.ebay.com/ebaymotors/86-9...r_Truck_Parts_Accessories&hash=item3cb426469d

 

[hesutton]

That track bar looks correct. The mid frame mount you posted looks to be for a 4 inch suspension lift. Other than that, it seems correct (given you have a 4 inch lift). The track bar axle mount for the Dana 60 is over on the passenger's side of the axle, either on or near the spring perch. I'd have to crawl under the truck to tell you for sure.

Any photos of what you have now?

Heath

 

[joe f350]

You must be registered for see images attach

the mount on the frame

and the mount axle the d44 thats under the truck know

You must be registered for see images attach

 

[joe f350]

bump

 

[Diesel_brad]

Yes. that link you put up is for a 4" lift and your truck has a 4" lift so it will work like Heath said

 

[joe f350]

ik i order one just want a second appion thx brad

 

[towcat]

joe-
you don't even need to go far to buy it.....



Ford Track Bar Drop Bracket and Manual Locking Hubs (lafayette / orinda / moraga)

Date: 2011-02-04, 2:19PM PST
Reply to: [email protected] [Errors when replying to ads?]

These parts were once used on a 1997 F350, but should work on F350 trucks from 1986 to 1997.
May also work on F250 trucks.


Superlift drop track bar bracket for use with a lift kit - $50

Stock Ford manual locking hubs (30 spline) - $50

Also located the bottom bracket that goes under the diff side (Dana 60) for the leaf spring U-bolts - $40

• it's NOT ok to contact this poster with services or other commercial interests

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

PostingID: 2197564718

 

[joe f350]

lol thanks cal i allread order warn perm hubs and i got the bottem bracket plate but i need the drop bracket

 

[towcat]

lol thanks cal i allread order warn perm hubs and i got the bottem bracket plate but i need the drop bracket

ummmmmm........
everything he's selling is "a la carte"
$50 and the drop bracket is yours...
there's no argument left.

 

[joe f350]

i was just making shure i was look for the right parts wheres lafayette / orinda / moraga

 

[towcat]

i was just making shure i was look for the right parts wheres lafayette / orinda / moraga

CA24 and I680.
you don't get out much do ya?

 

[joe f350]

nope i mainly drive to fairfeild or fresno and im only 21

 

[towcat]

nope i mainly drive to fairfeild or fresno and im only 21

by the time I turned 21 I had worn out three cars from all the driving I was doing. For three years that was done with a restricted license due to getting busted for drag racing.

 

[jonathan]

by the time I turned 21 I had worn out three cars from all the driving I was doing. For three years that was done with a restricted license due to getting busted for drag racing.

thats like explaining to a cop why i was going 75 in 30. i told i just put some goodies on my truck and i was"dialing it in"

 

[joe f350]

by the time I turned 21 I had worn out three cars from all the driving I was doing. For three years that was done with a restricted license due to getting busted for drag racing.

well back in th 1930 when u where a kid gas was like 5 cents gallon