So I'm looking at this 93 f250 but has an oil leak...

[texcl]

He took the offer so I guess we will see where this leak iscoming from. looks like I will have a jump seat to rear bench conversion to do over the winter. he says the leak is right in the center not on passenger or driver side.

 

[towcat]

He took the offer so I guess we will see where this leak iscoming from. looks like I will have a jump seat to rear bench conversion to do over the winter. he says the leak is right in the center not on passenger or driver side.

you are going to want these part numbers.......

 

[texcl]

How hard is it to install a sleeve? Do ypu pull the engine or do in frame? Do this mean the crank or bearings are shot?

 

[towcat]

How hard is it to install a sleeve? Do ypu pull the engine or do in frame? Do this mean the crank or bearings are shot?

get the sleeve and installer listed on the box.
get a rear seal kit. it will come with a rear seal and a gasket.
get a tube of gray RTV for the oil pan area.
pull the trans and go to town.
it's that simple. well...not really.....i'd say a weekend with a couple of buddies to help wrestle the trans and a case of beer.

 

[texcl]

That's good, probably a good time to replace the clutch too. we'lp see what we end up with.