spencnaz
Full Access Member
- Joined
- Jul 26, 2006
- Posts
- 314
- Reaction score
- 0
Hello all,
I've mounted a Racor fuel/water separator and filter on the frame of my 01 F250 but have run into a problem of how to plump the filter in.
Does anyone have any diagrams or photos of how you installed the filter? My issue is either trying to cut the metal fuel lines or plumbing into the plastic feed line to the pump.
I used Powerstrokehelp.com's recommendations on the filter and the fittings kit from the Ford dealer. Fyi, I'm not going to have this become an arguement thread pro or con for Bill Hewitt.
I just want to know what I should do next, as it's looking more and more likely that I'm going to have to cut the metal feed line. How did any of you guys do this?
I've mounted a Racor fuel/water separator and filter on the frame of my 01 F250 but have run into a problem of how to plump the filter in.
Does anyone have any diagrams or photos of how you installed the filter? My issue is either trying to cut the metal fuel lines or plumbing into the plastic feed line to the pump.
I used Powerstrokehelp.com's recommendations on the filter and the fittings kit from the Ford dealer. Fyi, I'm not going to have this become an arguement thread pro or con for Bill Hewitt.
I just want to know what I should do next, as it's looking more and more likely that I'm going to have to cut the metal feed line. How did any of you guys do this?