superbeetle73
Registered User
i need the part number for a elbow after the check valve. it is a 1/8 thread male to a 7/16 comprsession . i need help please
need return elbow part number for 6.9
- Thread starter superbeetle73
- Start date
icanfixall
Official GMM hand model
Way to many answers to that question. I assume your refering to the injection pump return line. A local injection pump repair shop or a local wrecking yard is the only place you will find that part. Ford wont have that part nor will international. How did you break it off.. If this is what you are posting about... Your description of what you want leaves open as to what your talking about. More info is needed.
Knuckledragger
blowing chunks and grabbing porcelain
Sounds like a common Dorman part. Any good hardware store can find one for you if they don't have it in stock.
OLDBULL8
Good Morning Ya'll.
i need the part number for a elbow after the check valve. it is a 1/8 thread male to a 7/16 comprsession . i need help please
Take the broken part to an Ace Hardware, they will find the fitting for you.
smolkin
Stuck inside Mobile
I've had good luck with hydraulic repair shops for weird fittings.
icanfixall
Official GMM hand model
You never did answer wht fitting you are looking for so... If the fitting you want is what most here are GUESSING about don't get all into this fitting having to be exactly the same. IF... And only if this is the return line fitting on top of the pump, it can be almost anything. You cn cut off the brass nut to the steel return line and use rubber hose. That line is 3/8 inch. Lots of engines are plumbed this way with a short piece of rubber hose. Please.... In the future be ready to answer questions if the question you ask is not clear. You can see what your talking about... We can't. Thats why only a S.W.A.G.
can be made....
can be made....
