Lost brakes

[frankenwrench]

I've had really good luck with

You're right. At one time, I was having an awful time getting a good master cylinder for my 1981 F150. I got to the point where I could pull the old one off, bench bleed the new one, and have it installed in less that 20 minutes using only hand tools.

I've had really good luck with the tokico 1 1/4 MC's. Bought three of them about 4 years ago and haven't had any issues this far and seems to take a bunch of the loose pedal travel away. Much more responsive imo.

You must be registered for see images attach

You must be registered for see images attach

 

[frankenwrench]

Was gonna go with this 1 1/2

You must be registered for see images attach

but as u can see, I ran into a snag I didn't want to bother with

You must be registered for see images attach

The one on the left is the inch and a half, the one on the right is the stock replacement I removed and saved for some reason.

 

[JRHS]

It looks like the new master cylinder has solved the problem . The Pedal no longer travels to the floor and the brakes grab nicely . Thanks for all your advise !