I'm ordering a 2 micron fleetgaurd setup but for the time being I'm running my stock filter which i believe is rated to around 10 microns. I'm pushing my fuel though with a Holley blue. My filter probably has about 2 tanks on a 10% mix and 100 miles on this tank which is around 60% WMO i noticed my my fuel pressure dropping from 15 psi to around 0 when under throttle. I pulled my fuel filter, took a shop rag and cleaned out each individual crease in the filter and stuck it back in and I'm back to normal pressure again. I'm filtering my oil with 2 household filters (5 micron and 1 micron). So why am I clogging up filters? I'm kinda afraid that when i'm running a 2 micron that i'm going to plug it up almost instantly.