freebird01
Post Turtle!
1985 Ford 302 out of a grand marque
E5 casting
Bare block w/ heads
all machine work done.
bored .030 over
new cam bearings installed.
block painted ford blue
heads had valves and seats reground.
this is a roller ready block.
about $600 in machine work.
comes with .030 over forged flat top pistons on stock rods.pistons and rods came out of a motor with 30k on the clock and were checked out by the same shop that did the machine work. one piston was replaced due to wear and was machined to match the set.
comes with stock crank. may need turned may not. unknown. was got in a trade
set of brand new std size mains and rod bearings
set of moly rings
$700 firm
E5 casting
Bare block w/ heads
all machine work done.
bored .030 over
new cam bearings installed.
block painted ford blue
heads had valves and seats reground.
this is a roller ready block.
about $600 in machine work.
comes with .030 over forged flat top pistons on stock rods.pistons and rods came out of a motor with 30k on the clock and were checked out by the same shop that did the machine work. one piston was replaced due to wear and was machined to match the set.
comes with stock crank. may need turned may not. unknown. was got in a trade
set of brand new std size mains and rod bearings
set of moly rings
$700 firm
