FS: Balljoint Dana 60 changever kit.

[towcat]

If you are a E4OD F250 4x4 or a early F350 4x4 this is a literal bolt-in kit for you. Everything you need will be there for converting over. Stock shackles, springs, steering linkage, pitman arm, transfer case yoke, CV axle, panhard bar frame bracket, panhard bar and complete Ball joint Dana 60 axle from manual locking hub to manual locking hub is there and everything in between. 4.10 ratio
Only needs a swaybar kit to make it trully complete but the brackets on the axle are already there.
Will fit other ford F250/350's from 1980 to 1997 but the CV axle may need to be modified for length.
Cost? $1500. No offers and no trades. Shipping extra.

 

[6 Nebraska IDIs]

Ryan Eklund contacted me about wanting one of these. I'd write him a PM to see if he's interested. I don't know how far of a drive it would be for him, But if I were within 12hrs of you I'd drive to get it just to get a chance to meet ya!

 

[towcat]

he's 8 hours away.
my trucks are ratbuckets compared to how he's taken care of his.

 

[6 Nebraska IDIs]

I bet he'll buy it from you. Thats a days drive. Easy peasy. And yea, none of mine are in the condition his is, atleast none of them are anymore.

 

[towcat]

here's a pic of the truck in the meantime.
you can pretty much be assured the D60 under the front is in as good of shape.
btw....truck has a bad motor and CC's aren't selling at all out here for the last year.....therefore it's getting pulled apart.
don't ask about any of the other part of the truck in the meantime though.

 

[subway]

here's a pic of the truck in the meantime.
you can pretty much be assured the D60 under the front is in as good of shape.
btw....truck has a bad motor and CC's aren't selling at all out here for the last year.....therefore it's getting pulled apart.
don't ask about any of the other part of the truck in the meantime though.

no not again dont scrap it, i am getting PTTD - Post Tramatic Truck Disorder

 

[idipwr]

Why would you scrap out such a nice truck without even offer it up for sale to someone here? Just sayn, seems a shame.

 

[towcat]

Why would you scrap out such a nice truck without even offer it up for sale to someone here? Just sayn, seems a shame.

here's the problem.
the demise of this truck was due to a leaky radiator. it was driven until the motor completely seized up. I can assume the trans got overheated too at the same time and no telling what the turbo went through. if the turbo checks out, it will be put up for sale.
another issue. these trucks are getting to the point ( in kali at least ) where they are worth more in parts than whole. deals can be had frequently where running CC 4x4's and smaller can be bought for $500 to $1500. yo have to be quick in calling when the Ad hits CL and be there to close the deal in cash within the day. it also doesn't hurt having a towtruck or a trailer to drag the truck home too. "Drag Rag" is my biggest competition for IDI diesels in the SF Bay Area. we actually check with each other to make sure we aren't getting into a bidding war against each other. bottom line around here is the economy is in the toilet and noone wants a work truck. export to the free states don't happen often enough on fords, I have very good luck with Cummins powered Dodges though. so, as result, these trucks get pulled apart now.
lastly, there is another member here wanting to buy the rolling chassis less front axle, therefore I am protecting him for the time being from being bid against.

 

[idipwr]

So what you are saying someone couldnt buy it as it sits if they come get it or arrange for it to be picked up and shipped to them?

 

[towcat]

So what you are saying someone couldnt buy it as it sits if they come get it or arrange for it to be picked up and shipped to them?

what I am saying, is there is a member here who has expressed enough interest where I am giving him time to make a decision before releasing it to offers or parting. Do bear in mind I am looking to get a minimum of $1500 for it since I know I can sell the axle assy for that much. the question is what a non-running truck is worth plus transport? I am just trying to be fair and not have anyone feel I am screwing them.

 

[idipwr]

what I am saying, is there is a member here who has expressed enough interest where I am giving him time to make a decision before releasing it to offers or parting. Do bear in mind I am looking to get a minimum of $1500 for it since I know I can sell the axle assy for that much. the question is what a non-running truck is worth plus transport? I am just trying to be fair and not have anyone feel I am screwing them.

I understand. Keep me in mind if you end up selling it as a whole.

Thanks

 

[Dsl_Dog_Treat]

Did you hear that towkitty?

 

[towcat]

Did you hear that towkitty?

yup.
all the way over in kali
here's more pics......

 

[DragRag]

hmmmmmm

 

[towcat]

rest of the truck up for sale.
will start new thread .