TWeatherford
Full Access Member
So I went out to fire up the 88 today, and only got a click. As I started troubleshooting, I notice that the wiring on the fender is different than I've ever seen one wired before. It looks to me like that little solenoid is carrying all the load of spinning the starter - so its probably failed (at least it didn't weld the contacts together and fail in the on position ). The solenoid is connected to the battery on with the lead on the right, and the lead on the left goes to the starter. Is this an acceptable way to send power to the starter? Any advice on troubleshooting the solenoid?
You must be registered for see images attach