OLDBULL8
Good Morning Ya'll.
Yes Yes Yes, they are 1/4" NPT female.
Duralift vs Holley Red
- Thread starter crash-harris
- Start date
crash-harris
Breaker! Breaker!
Excellent.
So then does anyone know if mounting a Duralift pump on its back would have any negative/undesired effects?
So then does anyone know if mounting a Duralift pump on its back would have any negative/undesired effects?
riotwarrior
Full Access Member
Mount it glass bowl down
End of story
End of story
crash-harris
Breaker! Breaker!
Eh, that's what I thought. So it will be. I'll take the pump with me when I go to lowe's and get fittings as well as some steel for bracketry. I think I'm going to use the pre-slotted box and angle pieces so all I have to do is cut to length and bolt it all together.
crash-harris
Breaker! Breaker!
Just got the last of the fittings for the Duralift install. Since a good bit of the fuel line on the truck is already rubber line, I plan to use 2 male-male barbs to extend it. One where it currently connects to the mechanical fuel pump and one where a PO had installed a small inline electric fuel pump near the FSV.
And for the filter head. Wanted to space it out just a bit to I can adjust it more if need be and since I will also be mounting bar stock on the filter head bracket for the coolant filter head.
You must be registered for see images attach
You must be registered for see images attach
And for the filter head. Wanted to space it out just a bit to I can adjust it more if need be and since I will also be mounting bar stock on the filter head bracket for the coolant filter head.
You must be registered for see images attach
Similar threads
