DT360 into 1991 F350

[6.9poweredscout]

https://youtu.be/c9FK8nXCFqU

Sent from my SM-G920V using Tapatalk

 

[6.9poweredscout]

Got a hx35/40 hybrid with a billet HE351 compressor wheel. Just have to get an exhaust flange and oil feed line. Should help out a bit.

You must be registered for see images attach

You must be registered for see images attach

Sent from my SM-G920V using Tapatalk

 

[6.9poweredscout]

Pulled at one of the local fairs. I was being gentle on the clutch so it bogged down a little off the line, got back on the clutch and revved it up then got off the clutch again. Track was way more sticky than I expected. Didn't build boost till half track, by then the weight was up. I was pleased with 245 feet and nothing broken. Should light off much better with the 35/40 hybrid when I swap it on.

https://youtu.be/Bs8FJJALLeI

You must be registered for see images attach

Sent from my SM-G920V using Tapatalk

 

[6.9poweredscout]

Finally swapped the HX35/40 hybrid. Had to flip the exhaust manifold to get more clearance on the compressor side. Definitely woke the truck up. It'll hit about 35 psi and pulls all the way through 5th no sweat. Can't wait to hook to the trailer now. Actually hooking to the pulling sled Wednesday, we'll see how it lights up.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Sent from my SM-G920V using Tapatalk

 

[subway]

Nice! I still want to do compounds but might do this in the mean time if I find one.

Sent from my SPH-L720 using Tapatalk

 

[6.9poweredscout]

Price was right. Just paid $150 for the billet wheel and had the turbo done for free, $40 for the feed hose, and $25 for the adaptor plate.

Sent from my SM-G920V using Tapatalk

 

[BrandonMag]

Price was right. Just paid $150 for the billet wheel and had the turbo done for free, $40 for the feed hose, and $25 for the adaptor plate.

Sent from my SM-G920V using Tapatalk

Nice prices. So, is that a Super B turbo?

 

[6.9poweredscout]

Not sure what a super b turbo is....

Sent from my SM-G920V using Tapatalk

 

[BrandonMag]

The Super B is a turbo made by BD Diesel, it's based on a BW S300.

I got confused and for some reason was thinking the Super B was an HX35/40 hybrid.

 

[6.9poweredscout]

Ohhh. No I wish it were an S300.

Sent from my SM-G920V using Tapatalk

 

[Thewespaul]

This is freakin awesome. Coolest bricknose out there, cant wait to see you on a honest dyno!

 

[6.9poweredscout]

Thanks. Ditto... Lol. Definitely something off on that one.

Did some towing with the hybrid turbo. Not a fan. Way too much heat. Looking for a S366.we'll see what I come up with.

Sent from my SM-G920V using Tapatalk

 

[subway]

That sucks but I am glad to see some feedback. I was looking at the h3tb and hx35 combo but now I am thinking it will not flow enough for me.

Was looking to pull the trigger on a hx35 I found local. Now I am going to wait.

Sent from my SPH-L720 using Tapatalk

 

[6.9poweredscout]

Yeah. Think I'm going to pull the turbo off to sell it, swap on the old turbo...and hood ...And throw a hood stack on it till I buy another turbo. Muahahah

Sent from my SM-G920V using Tapatalk

 

[Thewespaul]

Gotta love the exhaust housing to ac components clearance!