FordGuy100
Registered User
So, I need to know which way the bearing goes into the flywheel . Yes, I forgot. Does it need to be pressed in from the rear of the flywheel (rear of truck facing towards the front), or the otherway?
Also, how do you test the CDR to see if its bad. When I pulled my intake, the tube running to the intake from the CDR had so much oil in it, all I had to do was turn it on one end and oil would start dripping out at a pretty good rate.
Also, how do you test the CDR to see if its bad. When I pulled my intake, the tube running to the intake from the CDR had so much oil in it, all I had to do was turn it on one end and oil would start dripping out at a pretty good rate.