Bumper question
- Thread starter BrandonMag
- Start date
LCAM-01XA
Full Access Member
OMG, it's a ***** shoved in a bumper!!! Talk about a flexible girl, lmao!
The bumper mounts on the '92-up trucks are different from those on the bricknose trucks like yours, so you may have to do some modifications to yours to make that bumper fit.
The bumper mounts on the '92-up trucks are different from those on the bricknose trucks like yours, so you may have to do some modifications to yours to make that bumper fit.
is that the ***** pictered in the last pic?
also never heard of warren winch or lights.
also never heard of warren winch or lights.
BrandonMag
Dana 50 rebuilder
I called the guy and asked him a couple of questions about the bumper. I hadn't scrolled all the way down to the bottom of the ad when I called, and noticed her while talking to him. I asked him about her and he said she's single but costs more than $600.
It's a fairly common mistake you'll occasionally see on craigslist. I'm sure he meant Warn.
NMB2
Dunce
*****'s are standard load on the trails I run.....
(READ THE SIGN)
(READ THE SIGN)
You must be registered for see images attach
You must be registered for see images attach
LCAM-01XA
Full Access Member
lotzagoodstuff
Full Access Member
That is the bumper I really wanted for my truck, but I couldn't find a nice one so I modded my stocker.
I think the only thing you need to look at is the mounts and the corners of the bumper ends that are closest to your front tires. I really think it would fit as the brick nose trucks have lots of tire clearance.
Go get that thing Brandon: it' would look sweet on your rig
I think the only thing you need to look at is the mounts and the corners of the bumper ends that are closest to your front tires. I really think it would fit as the brick nose trucks have lots of tire clearance.
Go get that thing Brandon: it' would look sweet on your rig
OLDBULL8
Good Morning Ya'll.
You wanted the outside to outside measurement for the frame, here it is 40-1/2". On my 92 the frame has been modified but it should be the correct measurement. That is the tow bar bracket I made to get the truck home. You can see the front of the frame has been cut off done by the PO.
I don't need a bumper, but I sure as heck would take that drinking a beer in the 4th pic on craigs.
I don't need a bumper, but I sure as heck would take that drinking a beer in the 4th pic on craigs.
Attachments
Last edited:
Ataylor
Full Access Member
I always wanted one of those Warn bumpers, but was leary of the rubber or plastic sides. I have seen them on trucks loose and flappin away on the freeway. BTW I wouldn't mind if the ***** came with it.
BrandonMag
Dana 50 rebuilder
I was about 20 minutes away from the guy's house and called to let him know I'd be there shortly. He had just sold it. 
