blocks

[Exekiel69]

I'm looking for some blocks to level the truck once I finish installing the d60 on it and I found some from a member but I do not know if there is a difference from a f350 DRW blocks to a f250 srw blocks and so on. Anyone know about this?

Thanks.

 

[Double-S-Diesel]

350 drw are usually 4" high, and 250 are usually 2"

 

[sle2115]

350 drw are usually 4" high, and 250 are usually 2"

That's exactly what I've seen as well.

 

[Dieselcrawler]

anf f350 4x4 of solid axle vintage will have the 4 inch block.

 

[Diesel_brad]

ok, here is the deeleo
F250{80-current} SRW(obviously) are 2.5"

F350{80-85.5} SRW are 2.5"

F350{85.5-current} SRW are 4"

F350(80-85.5) DRW are 2.5" and ONLY 2.25" wide

F350 {85.5-97} DRW(cab-n-chassis was theONLY way to get a 4wd dually) are 4" and ONLY 2.25" wide and have 2 "eyes" on then for the u-bolt to go thru supporting the block

F350{99-Current}(pick-up, dont know about c-n-c) are 2.5" and 3" wide

 

[Exekiel69]

Thanks guys, that is good info. So I can use any of the above mentioned blocks, they'll just be different in hight, right? Will they be just as safe?
The ideal would be a set for a f350 4x4 DRW, how hard are this to find?

 

[wmoguy]

are you looking for the 4" blocks then? If youve got 2.5" inchers I'll swap ya?

 

[Diesel_brad]

The ideal would be a set for a f350 4x4 DRW, how hard are this to find?

You have 2.25" rear springs? then yes a 85.5-97 CAB-N-CHASSIS F350 DRW block(4" tall x 2.25" wide) is what you want. They never made a 4wd f350 DRW pick-up till 99

If you have 3" springs then you want a F350 SRW block(4" tall x 3" wide)
I think I have a spare set, i will have to look

 

[Exekiel69]

You have 2.25" rear springs? then yes a 85.5-97 CAB-N-CHASSIS F350 DRW block(4" tall x 2.25" wide) is what you want. They never made a 4wd f350 DRW pick-up till 99

If you have 3" springs then you want a F350 SRW block(4" tall x 3" wide)
I think I have a spare set, i will have to look

That would be great, I'll go to the farm tomorrow and measure them. Thanks.

 

[snaponprofile]

Hey, I'd love to get some blocks for the front, will a set of 2.5 rear ones work?

 

[bghnkinf350]

Very bad idea putting blOcks in the front.....

 

[Diesel_brad]

Hey, I'd love to get some blocks for the front, will a set of 2.5 rear ones work?

Put them in and let me watch you take the 1st hard turn. I'll bring the beer and the video camera

 

[snaponprofile]

What would happen?

 

[Diesel_brad]

What would happen?

They would roll right out and the axle would fall out from the truck making one hell of a mess when you hit someone head on or a tree.
Front blocks are OUTLAWED in about EVERY state

 

[MontanaDiesel1]

You must be registered for see images attach

You must be registered for see images attach

Hey Brad. Im confused. I have a 88 f250 7.3 dually. My springs dont seem to fit any of your descriptions. Im gathering parts for a shackle flip and reversal on all 4 corners. To increase suspension performance and ride comfort. Thanks for your input.