axle codes?

[zacky6661]

can anyone help me figure out what kind of axles the one tonners i bought are? im guessing its a d50 front with a sterling 10.25 rear, they came out of the same truck and i know theyre ford cause of the front axle IFS setup, the guy said they came off a 92 f-series but i need to know exactly what kind so i know what hubs and brakes to get for them.

here are the codes on the tags ( ^ indicates a upside down triangle)

front axle: 4.10 ^E8TA YC ^610312-2

rear axle: 2 V132C 4L10 10 2 OM12

just to know i couldnt tell if some were zeros or O's.

 

[Michael Fowler]

can anyone help me figure out what kind of axles the one tonners i bought are? im guessing its a d50 front with a sterling 10.25 rear, they came out of the same truck and i know theyre ford cause of the front axle IFS setup, the guy said they came off a 92 f-series but i need to know exactly what kind so i know what hubs and brakes to get for them.

here are the codes on the tags ( ^ indicates a upside down triangle)

front axle: 4.10 ^E8TA YC ^610312-2

rear axle: 2 V132C 4L10 10 2 OM12

just to know i couldnt tell if some were zeros or O's.

I'll tell you what I see based on a general knowledge of Ford part numbers, but it isn't much;
front is a 4.10 ration the axle was designed for a 1988 Truck ( E8TA), but may have been originally installed in a newer truck.

rear is also a 4.10 ratio and is Limited slip as designated by the "L" between the digits of the 4 10.

Sorry I couldn't be a more help.

 

[zacky6661]

I'll tell you what I see based on a general knowledge of Ford part numbers, but it isn't much;
front is a 4.10 ration the axle was designed for a 1988 Truck ( E8TA), but may have been originally installed in a newer truck.

rear is also a 4.10 ratio and is Limited slip as designated by the "L" between the digits of the 4 10.

Sorry I couldn't be a more help.

i do appreciate your help

 

[gandalf]

From just under a week ago:

Axle Codes

This is a starting point.

 

[Goofyexponent]

12 2.73 3800 FORD REG 1991
17 3.25 3300 FORD REG 1971
17 3.31 3800 FORD REG 1995
18 3.08 3800 FORD REG 1991
19 3.55 3800 FORD REG 1991
25 4.10. 5300 FORD REG 1991
29 3.55 5300 FORD REG 1991
35 4.10. 6250 FORD REG 1991
36 3.73 7400 DANA REG 1980
39 3.55 6250 FORD REG 1991
45 4.10. 7400 FORD REG 1991
49 3.55 7400 FORD REG 1991
65 4.10. 8250 FORD REG 1991
69 3.55 8250 FORD REG 1991
72 4.63 11000 DANA REG 1991
73 5.13 11000 DANA REG 1991
H5 4.10. 3800 FORD LIMITED SLIP 1991
H7 3.31 3800 FORD LIMITED SLIP 1995
H8 3.08 3800 FORD LIMITED SLIP 1991
H9 3.55 3800 FORD LIMITED SLIP 1991
B5 4.10. 5300 FORD LIMITED SLIP 1991
B9 3.55 5300 FORD LIMITED SLIP 1991
C5 4.10. 6250 FORD LIMITED SLIP 1991
C9 3.55 6250 FORD LIMITED SLIP 1987
D5 4.10. 7400 FORD LIMITED SLIP 1991
F5 4.10. 8250 FORD LIMITED SLIP 1991
W5 4.10 8250 FORD LIMITED SLIP 1995

First is the code ont he door tag, second is the ratio, third number is weight rating in pounds? followed by year and open diff or LS.

 

[82F100SWB]

That rear is a sterling, I don't have the info to decode the date code in that tag, but, the Dana BOM comes back with:
610312-2: FORD Model 50 FRONT 1989 - 1992.5 F-250, Standard Differential, 4.10 gears
So, any year in that group should work.