Parts are from my truck that I removed for 7.3 filter head swap and hard line/olive delete. All were being used with no issues.
I have:
-6.9 filter head with inlet/outlet fittings
-IP feed line (for IPs with the 90° fitting on the pump)
-IP return line with injector return manifold still attached, as well as the 5/16" barb to tank return. And the clamps/retainers that bolt to the intake manifold.
No cracks or leaks on any lines, no bends/kinks that aren't factory, and olives obviously will need to be replaced.
If you want/need any of these, let me know along with your offer. And yes I will ship them.
I have:
-6.9 filter head with inlet/outlet fittings
-IP feed line (for IPs with the 90° fitting on the pump)
-IP return line with injector return manifold still attached, as well as the 5/16" barb to tank return. And the clamps/retainers that bolt to the intake manifold.
No cracks or leaks on any lines, no bends/kinks that aren't factory, and olives obviously will need to be replaced.
If you want/need any of these, let me know along with your offer. And yes I will ship them.
